GFCI INSTRUCTIONS
Step 1 Plug the Ground Fault Circuit
Interrupter (GFCI) into a working outlet
USING THE ACCESSORIES
Vario spray wand
The Vario spray wand allows you to adjust the
cleaning pressure. To clean at maximum
pressure, the Vario wand must be positioned
to the high pressure setting (+). To apply
detergent, the wand must be positioned to the
low pressure setting (-).
6
For higher pressure turn wand
collar in the plus (+) direction.
For lower pressure turn wand
collar in the minus (-) direction.
Step 2 Press "TEST", then press "RESET" to
assure proper connection to power.
Dirtblaster
®
spray wand
This wand features a 0º pencil jet which
rotates 360º for maximum dirt cutting action,
effectively increasing cleaning performance up
to 50%. This wand combines the cleaning
performance of a 0º pencil jet with the surface
coverage of a wide angle nozzle. Not
recommended for soft materials, siding,
painted surfaces, decks or autos.
Warning
TO AVOID SERIOUS INJURY, NEVER
POINT SPRAY NOZZLE AT YOURSELF,
OTHER PERSONS OR ANIMALS
Note:
The actual
appearance
of the GFCI
may be
different
from this
illustration.