Pioneer DRM-6NX Service Manual page 41

6.3 FUNCTION OF PERSONAL COMPUTER FOR SERVICING
Use the floppy disc furnished with the product.
6.3.1 PROGRAM INSTALLATION AND
REMOVAL
Multi-play control (MPC) has one program to make it resident in
memory and another program that removes it from memory.
(1) MPC. COM : Multi-play control program
(2) MPCRMV. COM : Removes MPC from memory
MPC is executed as follows:
MPC [Enter]
This entry places MPC in memory. Execution of the next
program removes MPC from memory.
MPCRMV [Enter]
6.3.2 CALLING THE MPC WINDOW
When MPC has been placed in memory and your PC is in the key
input wait state..........
Press the GRPH key and the hyphen key at the same to make the
MPC window pop up.
Multi Play Controler for DR-UA124X Ver 0.5
DISC: TRACK:
Disc Play Pause
Track
Fig. 1 MPC Window
ESC key : Closes MPC window
[=] [+] [ ± ] [ ≠ ] key : Select functions
Space key or enter key : Executes selected function
Direct Selection of Disc
When the cursor is at the [Disc] position..........
Directly input a number from 1 to 6 to select the disc.
¶ Command List
Command
Command
Name
ZO MAGAZlNE OUT
ZS DISC SELECT
ZR DISC RETURN
R J REJECT
SA START
PL PLAY
PA PAUSE
SE SEARCH
TIME:
Volume Open Command
[Esc] to exit
PIONEER
Enters home mode by ejecting the magazine.
Enters park mode after removing the specified disc from the magazine and cramping it.
The address (DISC number) is to be specified prior to the command.
Example: 3ZS (to select the third disc from the top of the magazine)
Returns the disc to the magazine and enters home mode.
Stops the disc rotation and enters park mode.
Starts the disc rotation. When the first track is an audio track, the disc will pause at the beginning
of the track while it will pause at 0 minutes 1 seconds 0 frames in a data track.
Enters play mode and plays the disc.
Automatically stops if the specified command adress is overrun during playback.
Example: TM2000PL (Pause at 20 min. 00 sec. frame.)
Enters pause mode. stopping at the current point.
Searches for the specified address and enters pause mode after the search operation.
Example: BK4500SE (to specify a block), TR5SE, 6SE (to specify a track)
6.3.3 CALLING A SUB WINDOW
Execute a [Command] function to make a sub-window pop up, and
then a mnemonic command can be executed. Use the ESC key to
cancel a sub-window.
Direct Commands
〉 TA3SEPL
Fig. 2 Sub-Window
6.3.4 COMMAND LIST
Notes:
¶ The complete status "R" is returned when the execution of each
command is completed.
¶ Park mode : A state in which the disc is cramped.
¶ Home mode : A state in which the disc is released (the disc has
returned to the magazine).
Explanation
DRM-6NX
[Esc] to exit
41