Kyocera Mita FS-1900 Installation Manual page 14

Release Lever
Load Limit
12
5
Adjust the position of the paper stopper
located at the rear of the paper cassette.
Pull the release lever and slide the
paper stopper to the desired paper size.
When shipped from the factory, the
paper cassette is set to A4 size.
When using custom size paper, move
the paper guides and paper stopper all
the way out, insert the paper, then
adjust the paper guides and paper stop-
per to the size of the paper. Adjust them
Paper so that they are in light contact with the
Stopper
paper.
6
Make sure that the edges of the paper
are aligned. Slide the paper into the
paper cassette.
Load Limit
• Do not load more paper than
will fit under the load limits on
the paper guides.
• The paper cassette will hold
approximately 500 sheets of
paper with a 80 g/m² (21 lb.)
basis weight, or with a thick-
ness of 0.11 mm.