TTS Easi-Log User Manual page 7

Easi-Log Temp User Guide
Logging temperature
• Slide the power switch to the "I" position. The status
LED will flash and the LCD display will show the
temperature in °C.
• To start logging simply press and hold the Green Start
button until the Red status LED begins to flash.
• To finish logging press the Red stop button. The
status LED will light, whilst the data is saved and then
go off.
• Every time new temperature data is logged, a new file
is created, TEMPE000, TEMPE001 etc.
Connecting to a PC or Apple Mac
• The first time Easi-Log Temp is connected to the PC,
it will automatically install the drivers and may require
the computer to be rebooted depending on your
operating system
• Connect the Easi-Log Temp to the USB port on a
computer using the lead provided. After a few
seconds, the status LED will light and the LCD
display will show "USB".
• The PC or Mac will recognise the device as a USB
mass storage device and it will appear as a removable
drive in the file explorer window
7