Summary of Contents for TTS Easi-Log
- Page 1 ™ Please Read All Instructions Carefully Before Using User Guide Version 2...
- Page 2 Easi-Log Temp User Guide Please retain these instructions for future reference • Easi-Log Temp contains a non-replaceable, • rechargeable battery Do not attempt to remove the battery • In the event of an electro-static discharge, your Easi- • Log Temp may malfunction. In this case, please use...
- Page 3 Easi-Log Temp User Guide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
- Page 4 Displaying the temperature • To display the temperature, slide the on/off switch to “I”. The Easi-Log temp automatically displays the temperature in °C. To display the temperature in °F, press the Blue menu button once. To return to displaying °C, press the Blue menu button until...
-
Page 5: Setting The Time And Date
Easi-Log Temp User Guide the Blue menu button for 5 seconds and the unit will revert to °C. Setting the time and date • Slide the power switch to the “I” position. The status LED will flash and the LCD display will show the temperature in °C. -
Page 6: Setting The Logging Interval
When you have selected the desired logging interval press the Blue menu button once more. • The Easi-Log Temp has a battery life of approx 3 hours, but you can log data over longer periods if connected to an active USB port (see “Connecting to a PC or Apple Mac). - Page 7 TEMPE000, TEMPE001 etc. Connecting to a PC or Apple Mac • The first time Easi-Log Temp is connected to the PC, it will automatically install the drivers and may require the computer to be rebooted depending on your operating system •...
-
Page 8: Charging The Battery
• The battery can be charged by connecting to any active USB port. This will take between 2 and 4 hours depending on battery • When Easi-Log Temp is fully charged the Status LED will change to solid Red. -
Page 9: Troubleshooting
• Battery life approx 3 hours logging or measuring temperature Troubleshooting • Easi-Log Temp is designed to work reliably and predictably in all normal conditions. However, it is possible that problems may occur. Please check the following before contacting technical support:... -
Page 10: Support And Warranty
This product is provided with a one-year warranty for problems found during normal usage. Mistreating the Easi-Log Temp™ or opening the unit will invalidate this warranty. Any data stored on the unit and any consequential loss is not covered by this warranty. The battery is not user replaceable.