Setting The Logging Interval - TTS Easi-Log User Manual

Easi-Log Temp User Guide
year. When the year is correct, press and hold the Blue
button or just wait five seconds and the year will be
set.

Setting the logging interval

• Slide the power switch to the "I" position. The status
LED will flash and the LCD display will show the
temperature in °C.
• Press the Blue menu key until the unit displays 01 SEc.
This is the data logging interval i.e. the Easi-Log temp
will store one reading every second by default, but can
be set to 1,2,3,4,5,6,7,8,9,10,20,30 or 60 seconds.
Pressing the Green button will increase the interval
and the Red button will decrement the logging
interval. When you have selected the desired logging
interval press the Blue menu button once more.
• The Easi-Log Temp has a battery life of approx 3
hours, but you can log data over longer periods if
connected to an active USB port (see "Connecting to a
PC or Apple Mac).
• Easi-Log Temp can log over 750,000 points which
means that with a 1s interval, Easi-Log Temp can log
data for more than eight days, or seventeen months
with an interval of 60s.
6