Step 5: Testing The Configuration; Step 6: (Optional) Ftp Access For Firmware/Configuration; Uploads - Efficient Networks SpeedStream 5600 Series Installation Manual

Enter the desired command(s) and any necessary configuration
7
parameters as prompted.
This completes your bridge configuration. The bridge can also be reset to
the factory default configuration from the command line interface using
the
default all

Step 5: Testing the Configuration

After completing the configuration process, you can test the operation of
the bridge by starting a Web browser and accessing a remote web site such
as
http://www.efficient.com
shell) window and issue a "ping <ip_address>" command to a known host
on the wide-area network.
Step 6: (Optional) FTP Access for
Firmware/Configuration Uploads
Using FTP, you can:
Upload a new revision of the router firmware
•
Save the router's current configuration to a file on the host computer
•
and then upload the configuration to another 5600 router.
To log into the router via FTP:
If using Windows on a PC, select
1
Prompt
When the MSDOS window appears, enter:
2
3 At the User prompt, enter the username:
At the FTP command prompt, type in:
4
You can upload a new revision of firmware by changing to the
5
directory where the file is stored and entering the command
5600.img
The command prompt will return when the router has finished
6
programming the firmware into memory.
Efficient Networks
command.
. If on a UNIX system, bring up a shell window.
. Alternatively, you can open an MS DOS (or
Start
> >
Programs
ftp 10.0.0.1
ftp
binary
Bridge Configuration
Command
put
23