Table of Contents
Advertisement
Stop bits
Flow Control
Click
5
OK
When the HyperTerminal window appears, you must press the [
6
key five times to get the "Command->" prompt.
Enter the desired configuration commands and parameters when
7
prompted.
This completes your router configuration. The router can be reset to the
factory default configuration from the command line interface using the
default all
Step 4: Testing the Configuration
After completing the configuration process, you can test the operation of
the router by starting a Web browser and accessing a remote web site such
as
http://www.efficient.com
shell) window and issue a "ping <ip_address>" command to a known host
on the wide-area network.
Step 5: (Optional) FTP Access for
Firmware/Configuration Uploads
Using FTP, you can:
Upload a new revision of the router firmware
•
Save the router's current configuration to a file on the host computer
•
and then upload the configuration to another 5600 router.
To log into the router via FTP:
1
If using Windows on a PC, select
Prompt
When the MSDOS window appears, enter:
2
At the User prompt, enter the username
3
Efficient Networks
.
command.
. If on a UNIX system, bring up a shell window.
1
None
. Alternatively, you can open an MS DOS (or
Start
>
Programs
>
Command
ftp 10.0.0.1
ftp
Router Configuration
]
Enter
17
Advertisement
Table of Contents
