Step 1 > Before you begin, Install Line Filters Verify that the following items came with your DSL kit: Devices such as fax machines, caller Stand-alone Line Filter SpeedStream® Device ID boxes, or phones that share the same phone line as your DSL Documentation account require a line fi lter, which prevents noise from disrupting the...
Option B > Step 2 > USB Installation Method Choose an Installation Method Connect the SpeedStream Device ® 1. Connect the USB cable to the Internet connection USB port at the rear of the The SpeedStream ® device may be connected to either an existing USB port or an Ethernet SpeedStream device (blue port).
Page 4
Step 3 > PC Confi guration Procedures Macintosh Confi guration Procedures Windows Configuration 5. Click Next. Macintosh Configuration 6. Select Connect to the Internet. In order to setup the SpeedStream ® device, In order to setup the SpeedStream device, your computer must fi rst be confi gured to obtain ®...
Troubleshooting Green Blinking Blinking Green Red/Green Power - Power not Normal Self-test Flash write applied system failure if red in progress operation for more than 30 seconds Ethernet - Power not Ethernet link Ethernet traffi c applied connected fl owing in - Ethernet link either direction not connected...
Need help?
Do you have a question about the SpeedStream 5200 and is the answer not in the manual?
Questions and answers