Flow Chart Of Troubleshooting - Samsung E810 Service Manual

2. SGH-E810 Flow Chart of Troubleshooting
1. Power ON
'Power ON' Does not work
Check the current consumption
Current consumption
≥100mA ?
Check the V bat. voltage
Voltage ≥ 3.3V ?
Check the pin of U100
pin #11 ≥ 2.8V ?
pin #39 and #33 = 2.8V
Check the clock signal
at pin #3 of OSC400
Freq.=13MHz,Vrms 300mV
Check the Initial operation
YES
NO
YES
NO
YES
NO
YES
YES
END
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
NO
Check U100 and C114
NO
Pin #9=1.8V?
YES
Check the clock generation
NO
circuit (OSC400, U405 pin#4)
2-1
Down load again
Charge the Battery
Check U100 and C113