Subscribe to Our Youtube Channel
Related Manuals for Simco AEROSTAT HP-N-Ex
Summary of Contents for Simco AEROSTAT HP-N-Ex
- Page 1 Gublenstrasse 1 CH-8733 Eschenbach relstatic ag User Manual Ionizing Air Blower, type: AEROSTAT HP-N-Ex...
-
Page 2: Table Of Contents
Ionizing Air Blower, type: Aerostat HP-N-Ex CONTENTS Page 1. Introduction 2. Safety 3. Use and operation 4. Technical specifications 5. Installation 6. Putting into use 7. Functional check 8. Maintenance 9. Faults 10. Repair 11. Diposal 12. Spares www.relstatic.ch Page 2... -
Page 3: Introduction
Ionizing Air Blower, type: Aerostat HP-N-Ex 1. Introduction Read this manual completely before you install and put this product into use. This manual is intended as guideline for mounting, installing and maintenance for skilled technical people. It should be read in combination with the additional manuals supplied separately for the P-Sh-N-Ex anti static bar and the radial fan (blower). -
Page 4: Technical Specifications
Ionizing Air Blower, type: Aerostat HP-N-Ex 4. Technical specifications ® Aerostat HP-N-Ex Voltage 230/400 V 230/400 V 254/440 V 277/480 V Frequency 50 Hz 60 Hz 60 Hz 60 Hz Blower Voltage / Δ 230 V AC Δ 230 V AC Δ... -
Page 5: Installation
Ionizing Air Blower, type: Aerostat HP-N-Ex 5. Installation 5.1. Checks Check that the equipment is undamaged and that you have received the correct version. Check that the data on the packing slip corresponds with the data shown on the product received. -
Page 6: Putting Into Use
Ionizing Air Blower, type: Aerostat HP-N-Ex 5.3.2. Connecting the blower Connections shall be made in conformity with the applicable local regulations and instructions in this and the additional manual for the radial fan. 5.3.3. Checking the direction of rotation − Switch the motor briefly on. -
Page 7: Maintenance
Ionizing Air Blower, type: Aerostat HP-N-Ex 8. Maintenance Warning: − When carrying out work on the equipment: de-energise the equipment. − Follow instructions belonging to the Ex zone you are working in. 8.1. General maintenance ® − Keep the Aerostat clean and dry. -
Page 8: Repair
Ionizing Air Blower, type: Aerostat HP-N-Ex 10. Repair Warning: − When carrying out work on equipment: de-energise the equipment. − Repairs shall be made by a skilled electrical engineer. 10.1. Replacing the anti-static bar 1. Disconnect the anti-static bar. 2. Dismount the four screws in the profiles from the bar which connects the bar with the air guide. -
Page 9: Www.relstatic.ch Page
Ionizing Air Blower, type: Aerostat HP-N-Ex Fig. 2 Spare parts HP-N-Ex www.relstatic.ch Page 9... -
Page 10: Ec Declaration Of Conformity
EC Declaration of Conformity Manufacturer: Simco (Nederland) B.V. We declare under our sole responsibility that the product as described, is in conformity with the following standards. Product description: Ionising Air Blower consisting out of: Ionising bar P-Sh-N-Ex and blower DNG-47/S...
Need help?
Do you have a question about the AEROSTAT HP-N-Ex and is the answer not in the manual?
Questions and answers