Connecting Nava To Your Computer; Installing A Micro Sd Card - BHCnav NAVA 200 Owner's Manual

Connecting NAVA
Computer
Connect NAVA to your computer using the
USB connector cable provided.
USB cable
To connect NAVA to the computer:
1. On the back of NAVA, insert the
smaller connector on the USB cable
into the matching port, turn the screw
clockwise.
2. Connect the remaining cable end to
your computer's USB port.
to Your

Installing a Micro SD Card

The NANA Micro SD card tray is located
beneath the batteries.
1. Lift the cover on the back of NAVA
2. Lift the metal cover.
3. Push the card into the Micro SD card
4. To remove the micro SD card, lift the
5. Replace the batteries and the battery
33
MicroSD card slot
To install or remove a Micro SD card:
and remove the batteries.
tray and close the metal cover.
metal cover and remove the card from
the micro SD card tray.
cover.
Owner's Manual