Usb Setting Page - BHCnav NAVA 200 Owner's Manual

Map Setting Page
Use the Map Setting page to adjust the
bearing and change the maps.
Unit Setting Page

Position Format—sets the format
in which the coordinate is shown.

Map Datum – sets the coordinate
system in which a location is
shown.

Barometer – sets the unit of
measurement (Pa, KPa, mmHg,
mb, inHg)

Temperature – sets the unit of
measurement(℃, ℉)

Distance/Speed—sets the unit of
measurement to show your speed
and distance.

Area—select
measurement(km2, ha., Are, mu,
ft2, mi2, m2)

Angle—sets
the unit of
the unit of
measurement (degrees, rad) to
show the angle.
Heading Setting

Display—choose from Angle or
Characters.

North Reference—choose from
True North or Mag. North.

USB Setting Page

Activating USB MASS Storage
1. Connect the unit to a computer.
2. Select USB MASS
ENTER key.
3. A removable disk will appear on the
computer(NAVA200 and NAVA300).
If the micro SD card is on(NAVA400
And NAVA600), two removable disks
will appear on the computer.
25
Owner's Manual
Storage, and press