Page 1
Quick Guide NAVA Handheld GPS 200/300/400/600...
Page 2
Key Functions ZoomIN/OUT POWER/BACKLIGHT MENU MARK NEXT/EXIT FIND ROCKER/ENTER Main Pages...
Page 3
A200, NAVA300 and NAVA400 have five main pages: GPS Status, Map, Main Menu, Compass, Trip Computer. NAVA600 has an extra main page: Weather. Press and release NEXT/EXIT key to cycle through the pages. GPS Status page—appears when you turn the units on and display GPS satellite locations, satellite signal strength, and the receiver’s current location.
Page 4
To install 2xAA batteries: 1.Remove the battery cover from the back of the unit. Turn the D-ring counter-clockwise and pull the cover away. 2.Insert two AA batteries, observing the proper polarity. To install Li-ion batteries: 1.Remove the battery cover from the back of the unit.
Page 5
To create a new waypoint using the Map page:1. On the Mark/Waypoint Details page, highlight Map, and press ENTER to open Map page.2. Use the ROCKER key to move the pointer ( ) to the location you want to mark as a waypoint.3. Press and quickly release ENTER to capture the pointer location.
Page 6
page, press Enter to add it to the list of via points. 6.To add more via points to your route, repeat the process 4 and 5, and select Save. A route includes at least two waypoints. 7.When you have completed the route creation, select Goto to begin navigation on the Map page.
Page 7
3. Select Yes to save the entire track. To use the back track feature:1. Access the Track page from the Main Menu.2. From the Track page, select a saved track and press ENTER key3. On the Track Details page, select Goto. 4. Select Yes to start the back track.5.
Need help?
Do you have a question about the NAVA 200 and is the answer not in the manual?
Questions and answers