TP-Link TL-SC3130 User Manual page 48

Login Account: Enter the MSN account registered for you IP Camera.
Password: Enter the password of the MSN account.
Re-type password: Type the password again.
Alias: Give an alias for the account of your IP Camera. The figure above takes
"TL-SC3130G" for example.
Port range: Enter the port range used.
IP Notification: When this feature is enabled, the IP camera would notify "friends" on MSN
about its IP address when it logs into the MSN account or when its IP address is changed.
Privacy: When this feature is enabled, the MSN stream will be secured, then only users
whose MSN ids are in the Allow List can add the camera's MSN account and view the camera
video. When it's disabled, any user can add the camera's MSN id and see it.
Allow list: Enter the account of the MSN user you want communicate with in "User" field.
Click Add button and then the account will be added to the "Allow list". Choose an account in
the "Allow list" and click Remove button to delete it.
To use MSN to view the video captured by the IP camera, please follow the steps below.
A. Configuring your IP camera
Note:
If you use a Modem Router to access the Internet, you should set your IP Camera as the virtual
server with port range 20000-21000 on the Modem Router's web-based management page.
1. Click "BASIC->Network->Messenger" to enter the "Messenger" page. Enable Messenger
and then set the Login Account, Password, Alias, Port range, IP Notification, Privacy and
Allow list parameters as the above figure shows. Click OK to save your settings.
2. Click "BASIC->Network->Information" to enter the "Information" page. Add 192.168.1.1 as
the Primary DNS server.
43