General Information; Hazard Identification Messages - McQuay MicroTech III Installation And Maintenance Manual

General Information

This manual contains the information you need to install the BACnet
MicroTech III Chiller Unit Controller, incorporate it into the BACnet network, and maintain it.

Hazard Identification Messages

Electric shock hazard. Can cause personal injury or equipment damage.
This equipment must be properly grounded. Only personnel knowledgeable in the
operation of the equipment being controlled must perform connections and service to the
MicroTech III Chiller Unit Controller.
Static sensitive components. Can cause equipment damage.
Discharge any static electrical charge by touching the bare metal inside the control panel
before performing any service work. Never unplug cables, circuit board terminal blocks,
or power plugs while power is applied to the panel.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with this instruction manual, may cause interference to
radio communications. It has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be required to correct
the interference at his or her own expense. McQuay International disclaims any
liability resulting from any interference or for the correction thereof.
4
Dangers indicate a hazardous situation that will result in death or serious injury if not
avoided.
Warnings indicate potentially hazardous situations, which can result in property damage,
severe personal injury, or death if not avoided.
Cautions indicate potentially hazardous situations, which can result in personal injury or
equipment damage if not avoided.
DANGER
!
WARNING
!
CAUTION
!
WARNING
!
CAUTION
!
NOTICE
®
Communication Module on a
IM 966-1