Data Logging; Figure 15 Setting Up Data Logging - Gill MetPak II User Manual

Operation
3.1.6
Page 20

Data logging

NOTE. MetView logs data based on the MetPak II configuration not on the
MetView console settings.
To log MetPak data, click on the Logging button on the MetView console. The
Logging dialog box is displayed.
Figure 15 Setting up data logging
Setting up a logging file
1. Select Enable Logging to start logging to a file.
2. Identify the name and location for the logging file:
Log File location
Log file header
3. Choose from the following additional options:
Prepend Timestamp Adds the date and time to the logged data file.
Log File Rotation
MetPak II User Manual
©
Gill Instruments Ltd
Click on the Browse button to identify the folder
where you want to store the data file. Enter the name
of the file.
If required type some notes on the data that is to be
recorded which will appear at the top of the saved
data log file.
Set up segmented logging with each logged file length
determined by the number entered in the text box
below. The figure 3600, for example, means that each
log file length will be 3600 lines of data.
Last Change
20 August, 2010