Add A Master Number To The Socket - GSM Power Socket User Manual

4. M button (See 3 on Figure1) can be pressed for about 0.5 second to
switch on or off the output of socket.
After adding user numbers to the socket, users can send SMS
command to control the power supply output. (Refer to Chapter 3.2)
Power off:
1. Turn the power switch to "Off" position. The blue light turns off.
2. The socket outlet can work as a normal power socket.
can not be controlled by SMS commands. M button is
Socket
disabled.

Note:
1. If the GSM indicator light is not constant lights, which imply
the SIM card working abnormally, all functions of this socket
are invalid.
2. Check GSM network signal of the using place:



2.3 Add a Master number to the socket

The user must edit and send the following SMS to socket via his/her
mobile phone (the phone number will be the Master number) in order to:
Add a Master number to the socket: #00#
 Successful SMS reply
Welcome to use
Your Password is:1234.
GSM POWER SOCKET USER MANUAL
The GSM network's signal strength may affect the socket
feature. Therefore, before using, the user should ensure
that
GSM Power Socket
GSM network signal.
For the first time use, the user should perform a test-run
by sending SMS to the socket. This allows the user to
check the GSM network connection of the socket.
GSM Power Socket
is used in an area with a strong
.
13
GSM Power