Samsung P2070H Service Manual page 43

4. Troubleshooting
When replacing the panel
„
After replacing the panel, select the Panel Ch. No. item and press the MENU key for five seconds.
The Panel Ch. No. will then increment by one and the panel's time information will be set to 0.
At the same time, the panel cycle will be set to 0.
Service Mode features
„
Auto Auto : On / Off
-
PixelShift : On / Off
-
Country : English / Korean / Chinese / Japanese
-
HotPlug Time : 5~50 (Default 9 : 0.9sec)
-
=> This feature lowers the level of voltage to that of Hotplug Time during communication for recognizing the
recognition pin inside the monitor for HDCP authentication between a player and the monitor.
4-16