E N G L I S H C O N T E N T S O F T H E PA C K A G E T E C H N I C A L S P E C I F I C AT I O N S R A N G E O F A P P L I C AT I O N S H A R D W A R E I N S TA L L AT I O N R O U T E R C O N F I G U R AT I O N...
several PCs. Connect the ADSL modem to the WAN port of the OVERVIEW OF CONNECTIONS AT THE BACK OF THE ROUTER router and after a few seconds the WAN LED will light up. You can now connect the PCs. Once the PCs have been started up, the relevant LED will light up.
After clicking “OK” the router setup screen is displayed. R O U T E R C O N F I G U R AT I O N After you have correctly connected the router, you can start to confi gure it. For some providers you will need addition information, such as your username and a password.
Page 6
After clicking on “Next” the “Quick Setup - Wireless” screen is displayed. If you have Dynamic IP click on “Next” to go directly to the “Quick Setup – Wireless” screen If there is nothing you want to change, click on “Next”. After you have clicked on “Finish”...
Page 7
Use this space to write down your router’s settings. Wireless Settings SSID : …………………………….. PSK Passphrase: …………………………….. To get the most out of your router, please see the complete manual on the CD-ROM. Select WPA-PSK/WPA2-PSK for security type. For the “PSK Passphrase” function enter your own network key and make a note of the key as you will need it to make a wireless client connection with the router.
C E M A R K W A R N I N G W P S C O N F I G U R AT I O N This is a class B product. In a domestic environment, this WPS (Wi-Fi Protected Setup) function allows you to add a new product may cause radio interference, in which case the user wireless device to an existing network quickly.
Page 9
F C C S TAT E M E N T Any changes or modifi cations not expressly approved by the This equipment has been tested and found to comply with the party responsible for compliance could void the user’s author- limits for a Class B digital device, pursuant to part 15 of the ity to operate the equipment.