Care And Maintenance; Troubleshooting - TTS Bee-Bot User Manual

Care and maintenance

If necessary, wipe the Bee-Bot gently with a clean damp cloth
n
Keep the Bee-Bot away from direct sunlight and heat.
n
Do not allow the Bee-Bot to come into contact with water or other liquids. If
n
painting or gluing on the additional shells, ensure the shells are dry before
clipping to your Bee-Bot.
In the event of static, your Bee-Bot may malfunction. In this case, please
n
switch it off and then back on again to reset it.
The battery fitted to your Rechargeable Bee-Bot is a replaceable DC 3.7V,
500mAh, Lithium Polymer rechargeable battery.
The battery is located under a removable hatch held in place by a security
n
screw. Using the correct screwdriver, remove the hatch.
The battery can now be disconnected. Only the correct replacement battery
n
pack can be used. Connect the new battery and carefully locate the battery
in its compartment. Being careful not to trap the wires, replace the battery
hatch and secure with the screw provided.

Troubleshooting

Your Bee-Bot is a precision toy that has been designed to work within an Early
Years / school environment. However, it is not designed to be dropped or
trodden on or otherwise mistreated. Under no circumstances should you open
up the Bee-Bot as this will invalidate your warranty.
Problem
Bee-Bot won't do anything
Lights on, but no movement
No sounds
Bee-Bot doesn't travel straight
6
Solution
Ensure Power switch is "ON"
Ensure the batteries are charged
Recharge the batteries
Ensure "Sound" switch is "ON"
Look for foreign objects in wheels
Check for smooth patches on wheels