Advertisement
10 – Pre-Delivery Test
You will need to fully test the system to ensure it is working and connected to the vehicle properly. The following steps will
guide you through this process.
Step 1: Initial Test
a. Reconnect the vehicle battery if needed
b. Start the vehicle (ensure that it is safe to do so)
c. Perform the following steps on the Multi-Media Systems to ensure proper operation:
•
Turn the unit ON
•
Select all available sources
•
Test the Steering Wheel Controls
•
Test the Backup Sensors
•
Test the Navigation
•
Eject the test disc
•
Turn the vehicle off and wait for the unit to turn off
d. If the system does not function properly, reset the system by pressing and holding the reset
button located near the eject button
Step 3: Pre-Delivery Preparation
a. Start the vehicle (ensure that it is safe to do so)
b. Perform the following steps
•
Calibrate the Navigation Touch Screen, if not already performed
•
Calibrate the Primary Touch Screen, if not already performed
•
Retest the Radio and general audio performance of the system
•
Remove the protective films and clean the unit as needed
c. Place the Owner's Information package in the glove compartment
Service and Optional Parts List
Part Number
Description
DP-MZ0741
Quick Reference Guide
DP-MZ0744
Installation Guide
DP-1001
Manual, Owner's
DP-1003
Manual, Navigation
DP-1004
Remote Control
DP-1023
Pin, Stylus
DP-1020-M11
Card, SD w/ maps
DP-1022
Antenna, GPS
DP-1042
XM/iPod Multimedia Kit
DP-1035
Camera, Cylinder W/Mount
DP-1055
Sirius/iPod Multimedia Kit
Rosen Entertainment Systems
Installation Guide
Installation Guide Mazda CX-7
o
Select the Radio and test several stations
o
Select the DVD and test playback of a disc
o
Select the iPod and test music playback
o
Select the Satellite Radio tuner if equipped, and wait for Satellite Radio Preview to start
o
If the vehicle is equipped, test all steering wheel controls
o
If installed, test the sensors by placing a stationary object behind the vehicle (never test
the sensors by backing the vehicle into an object)
o
Repeat this for each of the sensors
o
Select the Navigation and wait for the satellites to be located
o
Confirm the location reported is your current location
Part Number
Description
DP-MZ0742
Harness, Main Interconnect
DP-1041
XMD1000 XM Radio Kit
DP-1008
Harness, AUX Out
DP-1009
Harness, AUX IN
DP-1010
Harness, Sensors/Camera
DP-1011
Harness, Dolby 5.1/Amp
DP-1013
Harness, iPod/Interface Box
DP-1016
Harness, XM Interface
DP-1015
Harness, iPod Replacement
DP-1047
GPS Antenna Windshield Mount
DP-1051
Harness, Sirius Interface
Copyright 2009 all rights reserved
DP-MZ0744 Rev B
Page 6
Hide quick links:
Advertisement
