Nokia N97 mini User Manual page 248

provider. To obtain these addresses, contact your internet
service provider.
Proxy server address — Enter the address of the proxy
server.
Proxy port number — Enter the port number of the proxy
server.
WLAN internet access points
Select Menu Settings
>
Destinations Access point, and follow the instructions.
>
To edit a wireless LAN (WLAN) access point, open one of
the access point groups, and select an access point marked
with .
Follow the instructions from your WLAN service provider.
Select from the following:
Wi-Fi network name — Select
Search for networks. If you select an existing network,
WLAN network mode and WLAN security mode are
determined by the settings of its access point device.
Network status — Define whether the network name is
displayed.
Wi-Fi network mode — Select
hoc network and to allow devices to send and receive data
directly; a WLAN access point device is not needed. In an
ad hoc network, all devices must use the same WLAN
network name.
and Connectivity
>
Enter manually
Ad-hoc to create an ad
Wi-Fi security mode — Select the encryption used:
WEP, 802.1x,
not available for ad hoc networks). If you select
network, no encryption is used. The WEP, 802.1x, and
WPA functions can be used only if the network supports
them.
Homepage — Enter the web address of the starting page.
Use access point — Set the device to create a connection
using this access point automatically or after
confirmation.
Available options may vary.
Active data connections
Select Menu
>
mgr..
In the active data connections view, you can see the open
data connections:
or
data calls
packet data connections
wireless LAN (WLAN) connections
Note: The actual invoice for calls and services from your
service provider may vary, depending on network
features, rounding off for billing, taxes, and so forth.
To end a connection, select
orWPA/WPA2 (802.1x and WPA/WPA2 are
Settings and Connectivity
Options > Disconnect.
Open
Connection
>
73