Nokia N97 mini User Manual page 218

Video sharing
Use video sharing (network service) to send live video or
a video clip from your mobile device to another
compatible mobile device during a voice call.
The loudspeaker is active when you activate video sharing.
If you do not want to use the loudspeaker for the voice call
while you share video, you can also use a compatible
headset.
Warning:
Continuous exposure to high volume may damage your
hearing. Listen to music at a moderate level, and do not
hold the device near your ear when the loudspeaker is in
use.
Video sharing requirements
Video sharing requires a UMTS connection. Your ability to
use video sharing depends on the availability of the UMTS
network. For more information on the service, UMTS
network availability, and fees associated with using this
service, contact your service provider.
To use video sharing, ensure the following:
Your device is set up for person-to-person
•
connections.
You have an active UMTS connection and are within
•
UMTS network coverage. If you move outside the UMTS
network during a video sharing session, the sharing
stops while your voice call continues.
Both the sender and recipient are registered to the
•
UMTS network. If you invite someone to a sharing
session and the recipient's device is not within UMTS
network coverage or does not have video sharing
installed or person-to-person connections set up, the
recipient does not receive invitations. You receive an
error message that indicates that the recipient cannot
accept the invitation.
Settings
To set up video sharing, you need person-to-person and
UMTS connection settings.
Person-to-person connection settings
A person-to-person connection is also known as a Session
Initiation Protocol (SIP) connection. The SIP profile
settings must be configured in your device before you can
use video sharing. Ask your service provider for the SIP
profile settings, and save them to your device. Your service
provider may send you the settings or give you a list of the
needed parameters.
To add a SIP address to a contact:
1 Select Menu > Contacts.
2 Open the contact or create a new contact.
3 Select Options > Edit.
4 Select Options Add detail
>
5 Enter the SIP address in the format
username@domainname (you can use an IP address
instead of a domain name).
Share video.
>
43