Advertisement
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this document including all text under subheadings therein
before set up or use of this product.
1.
Turn the Handle to open the Jaws and
place the workpiece between them.
2.
Loosen Tilt Screw and rotate the
Vise to the best orientation and
pair of jaws for the job: Straight Jaws,
Pipe Jaws or V-Jaws.
3.
Tighten the Tilt Screw to secure the
Vise before starting any work.
4.
Close the Jaws until the workpiece
is held securely. Do not overtighten
the Jaws. Overtightening the Jaws
could damage the workpiece.
Note: Use padding when necessary
to prevent workpiece damage.
Maintenance and Servicing
Procedures not specifically explained in this manual
must be performed only by a qualified technician.
1.
BEFORE EACH USE, inspect the
general condition of the tool. Check
for misalignment or binding of
moving parts, cracked or broken
parts and any other condition that
may affect its safe operation.
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Replacement parts are not available.
Item 61163
For technical questions, please call 1-800-444-3353.
Straight
Jaws
Handle
Pipe
Jaws
V-Jaws
2.
AFTER USE, clean external surfaces
of the tool with clean cloth.
3.
Lubricate the moving parts
of the Vise periodically with a
high quality machine oil.
Anvil
Tilt
Screw
Base Screw
Base
(1 of 2)
Page 3
Advertisement
