Download Print this page

Central Forge 61163 Owner's Manual & Safety Instructions page 2

Rugged cast iron multi-purpose vise with anvil

Advertisement

Specifications
Important Safety Information
1.
Mount according to these instructions
before use. Improper mounting
can create hazards.
2.
Wear ANSI-approved safety goggles
and heavy-duty work gloves
during mounting and use.
3.
Keep hands clear of Jaws.
4.
Do not use additional leverage
for tightening jaw grip.
If required, use a larger vise.
5.
Do not strike Vise with hardened tool.
Inspect before use; discard if chipped.
6.
Keep work area clean and well lit.
7.
Keep bystanders out of the work area.
8.
Do not use when tired or when
under the influence of alcohol,
drugs or medication.
Mounting Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this document including all text under subheadings therein
before set up or use of this product.
1.
Vise must be mounted on a solid,
level surface capable of supporting
combined weight of Vise, workpieces,
and applicable forces.
2.
Use the holes in the base of the Vise as
a template to mark the bench surface.
Page 2
Jaw Throat Depth
Pipe Jaw Capacity
Swivel Capacity
For technical questions, please call 1-800-444-3353.
3"
2"
360°
9.
This product is not a toy. Do not allow
children to play with or near this item.
10. Use as intended only.
11. Inspect before every use; do not use
if parts are loose or damaged.
12. Maintain product labels and
nameplates. These carry
important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
13. The warnings, precautions, and
instructions discussed in this instruction
manual cannot cover all possible
conditions and situations that may occur.
It must be understood by the
operator that common sense and
caution are factors which cannot
be built into this product, but must
be supplied by the operator.
WARNING! Verify that the installation
surface has no hidden utility lines
before drilling or driving screws.
3.
Drill holes and attach the Vise
firmly to the work surface with
appropriate hardware (1/2" hex bolts,
flat washers, and nylon insert nuts,
all sold separately).
Item 61163

Advertisement

loading