Handlebar Mounting Bolts - AD Boivin 2002-03 Snowhawk Service Manual

Shock absorbers
Check around the shock guards for the presence of oil leaks.
Shock oil must be replaced once a year. Refer to the "Rear
suspension and track" section.
It is advisable to change the shock fluid when preparing
the vehicle for storage. The presence of condensation in
the suspension fluid could cause rusting to occur during
the storage period.
Track
Check the condition, alignment and tension of the track.
With the engine turned off and the rear end of the machine
raised from the ground, rotate the track manually and inspect it
to make sure it is in good working condition. It must not be
cracked and all the lugs must be intact.
l NOTICE:
For track alignment and tension, refer to the "Rear suspension
and track" section.
2.8. CHASSIS AND STEERING

Handlebar mounting bolts

Verify and adjust the torque to 36.5 N-m (3.7 kg-m, 27 lbf-ft),
following a criss-cross order.
t t CAUTION
PERIODIC MAINTENANCE 2 - 7