Related Manuals for 3D Nord magicolor 2300W
Summary of Contents for 3D Nord magicolor 2300W
-
Page 1: Installation Guide
2300W ® Installation Guide 1800726-001A EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500... -
Page 2: Proprietary Statement
Thank You Thank you for purchasing a KONICA MINOLTA printer. Trademarks The KONICA MINOLTA and KONICA MINOLTA logo are trademarks or registered trademarks of KONICA MINOLTA HOLDINGS, INC. magicolor is a trademarks or registered trademarks of KONICA MINOLTA PRINTING SOLUTIONS U.S.A., INC. Other trademarks and registered trademarks are the propery of their respective owners. -
Page 3: Registering The Printer
Registering the Printer Mail (Americas only) —Fill out and send in the registration card enclosed in your shipment. Internet—Go to http://printer.konicaminolta.net/register and follow the instructions. CD-ROM—Follow the instructions on the CD-ROM. EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500... - Page 4 EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500...
-
Page 5: Getting Acquainted With Your Printer
Getting Acquainted with Your Printer Features Details Print speed (letter/A4) 16 monochrome black/4 color ppm Resolution 600 x 600, 1200 x 600 dpi SDRAM 32 MB 200-sheet Tray 1 Standard 200-sheet face-down output tray Standard Duplex option Optional IEEE-1284 parallel Standard Standard Documentation Set... -
Page 6: Space Requirements
Space Requirements Top View Side View Printer Parts The following illustrates the parts of your printer that are referred to through- out this guide, so please take some time to become familiar with them. Front View/Right Side View Output tray with output tray support Control panel Front door latch... - Page 7 Front Inside View Transfer belt release lever Transfer belt OPC drum cartridge Waste toner bottle Toner cartridges (cyan/ magenta/ yellow/black) Right Inside View Fuser Misfeed-clearing dial (manual paper feed dial) Transfer roller View with Accessories Duplex option Duplex option cover Getting Acquainted with Your Printer EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500...
-
Page 8: Setting Up Your Printer
Setting up Your Printer WARNING! Your printer weighs approximately 28 kg (62 lbs) with consumables. Be sure to have help when lifting and moving it. Do not plug in the printer until you are told to do so. We strongly suggest that you save the packaging materials in case you ever need to move or ship the printer. - Page 9 Pull the right-side door release $, and then open the right-side door %. Open the two green levers % at the top of the fuser unit $. % % % % % % % % % % % % $ $ $ $ $ $ $ $ Slide the two fuser separators up % and out &...
-
Page 10: Installing The Tray 1 Media Support
Pressing on the transfer belt unit with one hand, take the tag attached to the transfer belt unit fixture with your other hand, and pull the fixture straight toward you. This fixture protects the transfer belt during initial transportation. ! " Dispose of the fixture according to your local regulations. -
Page 11: Loading Tray 1 (Multipurpose Tray)
Loading Tray 1 (Multipurpose Tray) Tray 1 (the multipurpose tray) is used for all supported media types, including envelopes, labels, Japanese-sized postcards, thick stock, and transparencies. Check http://printer.konicaminolta.net/support (click on Answer Base) for currently approved media. To order approved media, go to www.q-shop.com. -
Page 12: Installing Accessories
Installing Accessories Attention Installing accessories always requires that the printer be turned off and unplugged. If you purchased any additional printer accessories (such as a duplex option), then install them now. If installation instructions are included with the accessory, follow them. If not, instructions are included in the User’s Guide (in PDF on the Utilities and Documentation CD-ROM). -
Page 13: Connect The Interface Cable
Connect the Interface Cable $ $ $ $ USB Port Use a USB 1.1 cable (Type B) when connecting the USB port on the printer to the USB port on your computer. % % % % Parallel Port Use a Centronics IEEE 1284 bidirectional parallel cable when connecting the parallel port on the printer to the parallel port on... -
Page 14: What's Next
What’s Next? You have now completed the hardware and software setup of your printer. There are four more important steps: From the Windows menu bar, select Start > Settings > Printers. Right-click on the magicolor2300W printer icon. Win98/Me: Select Properties. Win 2000/XP: Select Printing Preferences. -
Page 15: Safety Information
Safety Information Toner Do not throw the toner cartridge or toner into an open flame. The hot toner may scatter and cause burns or other damage. CAUTION: Keep out of reach of children. International Notices—Power Cord The following power cord requirements are in effect for your 220~240 V ±10% printer. Minimum: 0.75 mm Minimum: H05 VV - F The male plug is certified in the country in which the equipment is to be installed, and the... - Page 16 The internal components of the print head unit are NOT A FIELD SERVICEABLE ITEM. Therefore, the print head unit should not be opened under any circumstances. 1 - Print head unit 2 - Laser aperture Laser Caution For United States Users—CDRH Regulations This printer is certified as a Class I laser product under the Regulation Performance Standard according to the Food, Drug, and Cosmetic Act of 1990.
-
Page 17: Warranty Considerations
Warranty Considerations Various factors can affect a printer’s warranty, such as electrostatic dam- age, unsupported consumables, and other actions listed on this page. Read your printer warranty carefully. For information about your warranty, go to http://printer.konicaminolta.net/support, then click on “Answer Base”. If KONICA MINOLTA printer failure or damage is found to be directly attrib- utable to the use of non-KONICA MINOLTA approved consumables, print media, and/or accessories, KONICA MINOLTA will not repair the printer free... - Page 18 Warranty Considerations EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500...
Need help?
Do you have a question about the magicolor 2300W and is the answer not in the manual?
Questions and answers