Advertisement
Quick Start Guide
Turning the
heater on
Plug the cord
into a 230V or
240V power
point and
switch on.
Setting the
variable
temperature
Press the
MODE button
to select AUTO
setting.
Hints/Tips to Retain Heat in
Your Home
• Don't overheat your home. The
temperature of a heated room in winter
should be 18-21°C
• Your heater will work more efficiently if
you stick to Kambrook's recommended
clearance spaces
• Choose the right size heater for the room
type you want to heat
KCE540_IB_FA.indd 7
Press the ON/
Press the
OFF switch to
POWER/SWING
switch on.
button to
activate.
Setting the
oscillation
Press the
Press the
POWER/SWING
VARIABLE
button to
TEMPERATURE
activate. Press
button to
again to stop
increase the
the oscillation.
temperature
or press the
VARIABLE
TEMPERATURE
button to
decrease the
temperature.
Setting the
heating
mode
The heater will
start operating
at the LOW heat
setting.
Turning the
heater off
Press and hold
the POWER/
SWING button
to place the
heater in
standby mode.
• Zone off unoccupied rooms by closing
doors and only heat the main living areas
• Fit window coverings like curtains to halve
winter heat loss
• Put draft stoppers, such as a rolled up towel,
at the bottom of outside doorways to keep
out cold air
• Keep the heat in and the cold out by
installing wall and ceiling insulation.
• Avoid placing items too close to the heater
(both at the front and back) for optimal air
flow
Press the MODE
button to
select the HIGH
heat setting,
and retain a
comfortable
temperature for
your room.
Press the ON/
OFF switch to
switch off.
7
12/10/09 9:29 AM
Advertisement
