Page 2
In the event that you need some assistance with your Kambrook appliance, please contact our Customer Service Department on 1300 139 798 (Australia) or 09 271 3980 (New Zealand). Alternatively, visit us on our website at www.kambrook.com.au...
Page 3
Contents Kambrook Recommends Safety First Your Ceramic Tower Heater Quick Start Guide Using Your Ceramic Tower Heater Care and Cleaning Warranty Details KCE640_IB_FA.indd 3 16/10/09 10:49 AM...
Page 4
IMPORTANT: Please retain your instruction book for future use. At Kambrook, we believe that safe performance is the first priority in any consumer product, so that you, our valued customer can confidently use and trust our products. We ask that any electrical appliance that you use be operated in a sensible fashion with due care and attention placed on the following important operating instructions.
If found damaged in any way, immediately cease use of the heater and return to Kambrook or an authorised service agent for inspection or repair. NOTE: This Kambrook Ceramic Tower Heater is electronically...
Page 6
Your Ceramic Tower Heater 2000 watt ceramic heating element LED screen ThermoGuard protection for peace of mind Full featured remote control Ceramic heating elements for efficient heating KCE640_IB_FA.indd 6 Control Panel Convenient 7.5 hr auto-off timer 2 heat settings 75° degree oscillation for warmth throughout the room Power on/off Not Shown...
Page 7
• Don’t overheat your home. The temperature of a heated room in winter should be 18-21°C • Your heater will work more efficiently if you stick to Kambrook’s recommended clearance spaces • Choose the right size heater for the room type you want to heat KCE640_IB_FA.indd 7...
Using Your Ceramic Tower Heater Before First Use Remove any promotional material or packaging from the heater. Unwind the cord to its full length and place the heater on a firm, level surface in a stable upright position. Visually inspect the air inlet and outlets to ensure there are no blockages.
Page 9
Setting the Oscillation The oscillation function works at both operating temperatures. Press the SWING button once to activate. The heater will begin to oscillate from side to side. Press the SWING button again to stop the heater from oscillating. Setting the Auto-Off Timer The timer function works at both operating temperatures, and switches the unit off after a preset number of...
Care and Cleaning Ensure that the heater is switched off and disconnected from the power point before cleaning. Use a clean, dry cloth to clean the external surfaces of the heater. If the heater has collected dust or dirt inside the unit or around the elements, have the unit cleaned by a qualified service agent.
Page 12
Act 1993 in relation to the appliance. It applies in addition to the conditions and guarantees implied by that legislation. This Kambrook Replacement Warranty is valid only in the country of purchase, but other statutory warranties may still apply. This Warranty card and the purchase receipt for this...