Advertisement
Quick Links
Care, Cleaning and Storage
• Ensure that the heater is switched
OFF and disconnected from the
power outlet before cleaning.
• Use a clean, dry cloth to clean
the external surfaces of the heater.
If the heater has collected dust or
dirt inside the unit or around the
elements, have the unit cleaned
by a qualified service agent.
Do not operate the heater in
this condition.
• Do not attempt to open the case
of the heater at any time as there
are no customer serviceable
parts inside.
• When not in use, store the heater
(preferably in its original box) in a
cool, clean and dry location.
Kambrook - Australia
Building 2, Port Air Industrial Estate
1A Hale Street
Botany NSW 2019
Australia
Customer Service Line 1300 139 798
Customer Service Fax 1800 621 337
www.kambrook.com.au
Due to continual improvement in design or otherwise, the product you
purchase may differ slightly from the illustration in this book. Issue B13
Kambrook - New Zealand
Private Bag 94411
Botany, Manukau
Auckland 2163
New Zealand
Customer Service Line/
Spare Parts 0800 273 845
Customer Service Fax 0800 288 513
www.kambrook.co.nz
Advertisement
Related Manuals for Kambrook Suits KFH600
Summary of Contents for Kambrook Suits KFH600
- Page 1 • When not in use, store the heater (preferably in its original box) in a cool, clean and dry location. Kambrook - Australia Kambrook - New Zealand Building 2, Port Air Industrial Estate Private Bag 94411 1A Hale Street Botany, Manukau...
-
Page 2: Fan Heater
Upright Fan Heater Instruction Booklet Suits KFH600/610/660 models... - Page 3 In the event that you need some assistance with your Kambrook appliance, please contact our Customer Service Department on 1300 139 798 (Australia) or 0800 273 845 (New Zealand). Alternatively, visit us on our website at...
- Page 4 Contents Kambrook Recommends Safety First Your Kambrook Upright Fan Heater p7 Quick Start Guide Using Your Kambrook Heater Care, Cleaning and Storage...
- Page 5 IMPORTANT: Please retain your instruction book for future use. At Kambrook, we believe that safe performance is the first priority in any consumer product, so that you, our valued customer can confidently use and trust our products. We ask that any electrical appliance that you use be operated in a sensible fashion with due care and attention placed on the following important operating instructions.
- Page 6 • Do not use this fan heater with an external damaged in any way, immediately cease programmer, timer or any other devices that use of the fan heater and return to Kambrook switches the fan heater ON automatically or an authorised service agent for inspection since a fire risk may exist if the heater is or repair.
- Page 7 Do not use the appliance if the power supply cord, plug, connector or appliance becomes damaged in any way. Return the entire appliance to the nearest authorised Kambrook Service Centre for examination and/or repair. • Any maintenance other than cleaning should be performed at an authorised Kambrook Service Centre.
- Page 8 Your Kambrook Upright Fan Heater Not Shown 2 heat settings and fan only setting control • Carry handle (at rear of unit) Variable thermostat control • Safety tip-over cut-out switch (KFH610 & KFH660 models only) • ThermoGuard overheat Swing switch to set oscillation...
-
Page 9: Quick Start Guide
Quick Start Guide Turning the heater ON Ensure that the heat setting Plug the power cord into a control dial is set to the 230V or 240V power point and 'OFF' position. switch on. Setting the heating mode Turn the thermostat control to the Turn the heat settings control to 'MAX' position. - Page 10 Setting the oscillation Turning heater OFF (KFH660 only) This function will work in any Turn the heat control dial to the mode. Switch the ‘SWING’ button ‘OFF’ position, turn off at the to ‘I’ to activate. This will allow power outlet and unplug from the heater to oscillate back and the outlet.
-
Page 11: Before First Use
Using Your Kambrook Heater Before First Use 1 - Low heat setting (1200 watts) 2 - High heat setting (2400 watts) Remove your heater from its carton and associated protective wrapping. Turning the heat settings control to setting ‘1’ will set the heater into low Unwind the cord to its full length and heat mode (1200 watts). -
Page 12: Safety Features
• Your heater will work more heater will stop operating. Once placed back into the upright position, efficiently if you stick to Kambrook’s recommended clearance spaces. the heater will switch on again. • Choose the right size heater for the ThermoGuard Overheating room type you want to heat.