Related Manuals for Kambrook KCE340
Summary of Contents for Kambrook KCE340
- Page 1 Ceramic Tower Heater Instruction Booklet KCE340 KCE340_IB_A12.indd 3 2/11/12 11:37 AM...
- Page 2 In the event that you need some assistance with your Kambrook appliance, please contact our Customer Service Department on 1300 139 798 (Australia) or 0800 273 845 (New Zealand). Alternatively, visit us on our website at www.kambrook.com.au or www.kambrook.co.nz...
- Page 3 Contents Kambrook Recommends Safety First Your Kambrook Ceramic Tower Heater Quick Start Guide Using your Kambrook Heater Care and Maintenance KCE340_IB_A12.indd 3 2/11/12 11:37 AM...
- Page 4 IMPORTANT: Please retain your instruction book for future use. At Kambrook, we believe that safe performance is the first priority in any consumer product, so that you, our valued customer can confidently use and trust our products. We ask that any electrical appliance that you use be operated in a sensible fashion with due care and attention placed on the following important operating instructions.
-
Page 5: Important Safeguards For All Electrical Appliances
230V or 240V power point and for any damage, If found damaged in any way, immediately cease use of the heater and switched on. return to Kambrook or an authorized service agent for inspection or repair. Important Safeguards For All Electrical Appliances • Fully unwind the power cord before use. - Page 6 Important Safeguards For All Electrical Appliances continued WARNING: In order to avoid overheating, do not cover the heater. WARNING: This heater is intended for floor use only. Do not mount on the ceiling or wall. WARNING: Children should be supervised to ensure that they do not play with the heater.
- Page 7 Your Kambrook Ceramic Tower Heater LCD screen Remote control Control panel; featuring: Remote control signal receiver • Power ‘ON/OFF’ button 2000 watts ceramic heating elements • Mode button (2 heat settings, auto and fan only setting) Oscillating platform • Temperature buttons (+/-) Main power ‘ON/OFF’...
- Page 8 Quick Start Guide Turning the heater on Plug the cord into a 230V or 240V Switch the heater ON using Press the ‘POWER’ button to power point and switch on. the main power ‘ON/OFF’ activate heating. The heater switch located at the base will be in HIGH heat mode of the heater.
- Page 9 Using Your Kambrook Heater Before First Use Pressing the ‘MODE’ button once will set the heater into the AUTO Remove your heater from its carton mode. AUTO mode allows the heater and associated protective wrapping. to maintain the desired set room Unwind the cord to its full length and temperature.
-
Page 10: Using The Remote Control
Using Your Kambrook Heater continued Setting the Variable NOTE: There is a tip-over Temperature switch fitted to this heater. If the heater is tipped over, it The variable temperature can be used to maintain your desired will automatically turn off. The room temperature. - Page 11 Safety Tip-Over Cut-Out Switch There is a tip-over switch fitted to the base of the heater, if the heater is accidentally tipped over the heater will stop operating. Once the heater is placed back into an upright Position the heater will be in standby mode and the settings will need to be selected again.
-
Page 12: Care And Maintenance
18–21°C. Cleaning the Filter • Your heater will work more efficiently if you stick to • Your Kambrook Ceramic Tower Kambrook’s recommended Heater comes with a mesh filter clearance spaces. located at the rear of the heater •... - Page 13 Notes KCE340_IB_A12.indd 13 2/11/12 11:37 AM...
- Page 14 Notes KCE340_IB_A12.indd 14 2/11/12 11:37 AM...
- Page 15 Notes KCE340_IB_A12.indd 15 2/11/12 11:37 AM...
- Page 16 Kambrook - Australia Kambrook - New Zealand Building 2, Port Air Industrial Estate Private Bag 94411 1A Hale Street Botany, Manukau Botany NSW 2019 Auckland 2163 Australia New Zealand Customer Service Line 1300 139 798 Customer Service Line/ Customer Service Fax 1800 621 337...