Advertisement
uf_SG720_qig_700-2240A00_en-us.fm Page 4 Monday, October 12, 2009 11:56 AM
Installation overview
Installing the UTM Firewall device into a well-planned network is
quick and easy; however, network planning is outside the scope of
this guide. Take some time to plan your network prior to installing
your UTM Firewall device. To add your UTM Firewall device to your
LAN (Local Area Network), follow these steps:
Unpack the UTM Firewall device (page 5)
1
Set up a single computer connection (page 6)
2
Set your password (page 8)
3
Set LAN connection settings (page 10)
4
Select a security level (page 16)
5
Connect to your LAN (page 18)
6
Set up computers on your LAN (page 19)
7
Set up the Internet connection (page 23)
8
Register your UTM Firewall device (page 24)
9
Before you begin this setup process, make sure you have a computer
running Microsoft Windows (2000 or later) with an Ethernet network
interface card installed. You should be logged in with administrator
privileges.
4
Advertisement
