Caller Id; Caller Id Memory - Kirk DELTA S1 User Manual

*
4

Caller ID

Note! This function will only be available if you have a subscription for it.
When the subset receives a call, the calling number will be showed in the display.
If the caller's number is not transmitted, the display can show:
-InFo is showed if the number is restricted
-nr is showed if the number was unknown
UdLand is showed if the number is an international call
Error is showed if the data from the exchange is corrupted for any reason
The showed number / code is immediately stored in the Caller ID memory.

4.1 Caller ID memory

The subset can store the last 30 received calls. When the Caller ID memory is full,
the new data will replace the oldest record. If the same Caller ID number is received
again, the old record will be removed and the total call counter is unchanged. The
call counter is incremented. The call is stored with the newest date and time. When
new calls are stored, the LED is flashing until the Caller ID stack have been viewed.
Nummeret, som
har ringet
Antal gange
der er ringet
fra nummeret
1. Press the LIST - key and the last received number is showed in the
display.
2. Use the
- key and the
3. Use the
- key to change between showing number and showing
date, time and number of repeated call.
4. Press the LIST - key to return to idle state.
- key to look through the list.
13
Dato og tidspunkt for
det sidste opkald fra
nummeret