Related Manuals for Kirk KIRK DELTA S1
Summary of Contents for Kirk KIRK DELTA S1
- Page 1 USER GUIDE KIRK DELTA S1 / KIRK DELTA TRIO Frontpage to be replaced with 4 colour print...
-
Page 2: Table Of Contents
Table of contents 1 Layout of the telephone 1.1 Batteries 1.2 Installation 1.3 Programming of tone ringer 1.4 Date and time 2 User guide 2.1 Call from the subset 2.1.1 Ordinary dialled call 2.1.2 On-hook dialling 2.1.3 Last number redial 2.1.4 Call from direct memory 2.1.5... - Page 3 • Numberlabel KIRK DELTA S1 / TRIO is approved according to according to EU directive 1999/5/EC on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity. The CE-labelling only states conformity with directive 73/23/EEC relating to electrical equipment designed for use within certain voltage limits and directive 89/336/EEC relating to electromagnetic compatibility.
-
Page 4: Layout Of The Telephone
Layout of the telephone Symbols in the display New messages on the exchange board The batteries is almost used Call waiting is enabled (only DELTA TRIO) The telephone is in programming mode Call barring is enabled (only DELTA TRIO) Call forwarding is enabled (only DELTA TRIO) The microphone is muted The loudspeaker is active Keyboard... - Page 5 Dato og ur Lysdiode for Vis Display Teknikboks Nummer listen LIST Batteriboks Udskiftelig frontplade Kortnummertaster Opkald og medhør Lydstyrkeregulering Nummerlabel Change of batterie...
-
Page 6: Batteries
1.1 Batteries To use all the functions in the DELTA telephone you have to insert the enclosed batteries of the type LR06 (AA). When it is time to change the batteries, the - symbol in the display is turned on. During normal use the last for about 1 år. -
Page 7: Programming Of Tone Ringer
1.3 Programming of tone ringer In the box beside the handset there is a switch where it is possible to set the tone ringer to two different melodies, two different levels or to turn the tone ringer off. Switch no. 3: tone ringer ON tone ringer OFF Switch no. -
Page 8: User Guide
User guide 2.1 Call from the subset 2.1.1 Ordinary dialled call 1. Remove the handset from the cradle and wait for dial tone. 2. Dial the number. The number will be showed in the display. 1. Press and release the - key and wait for dial tone. -
Page 9: Call From Direct Memory
2.1.4 Call from direct memory See also chapter 6.1; Quick dial. 1. Remove the handset from the cradle or press and release the key. Wait for dial tone. 2. Press the memory key M0 - M9 or VIP, the number is showed in the display and dialled immediately. -
Page 10: Volume Regulation
2.3.2 Volume regulation The received signal in the handset and the loudspeaker can be regulated by means of the wheel in front of the subset. The level of the received signal will remain until next time the wheel is moved. 2.3.3 Microphone mute 1. -
Page 11: To End A Conversation
2.4 To end a conversation Replace the handset on the cradle to end the conversation. 2.4.1 Length of the conversation During the conversation the length is showed in the display as minutes-seconds. If the R - key is used the conversation length will be reset. After end of the conversation the length of the call is showed in 10 seconds. -
Page 12: Direct Memory
Direct memory The subset has 11 direct memories. Each memory has max. 21 digits. The corresponding names can be written on the index card located under the front cover. 3.1 Programming the direct memory By pressing the - key it is possible to store a 2 second pause. The pause is showed as P in the display. -
Page 13: Caller Id
Caller ID Note! This function will only be available if you have a subscription for it. When the subset receives a call, the calling number will be showed in the display. If the caller’s number is not transmitted, the display can show: -InFo is showed if the number is restricted is showed if the number was unknown... -
Page 14: Erase A Number In The Caller Id Memory
4.2 Erase a number in the Caller ID memory 1. Press the LIST - key and the last received number is showed in the display. 2. Use the - key and the - key to find the number in the list which has to be deleted. -
Page 15: Message Waiting
Message waiting Note! This function will only be available if you have a subscription for it. If the message waiting signal is received from the local exchange, the - symbol in the display is turned on. When you have heard the message on the local exchange and the subset has received the message waiting disable signal, the symbol in the display is turned off. -
Page 16: Speciel Services (Only For Delta Trio)
5.1 Speciel services (only for DELTA TRIO) KIRK DELTA TRIO can be programmed for easy use of Tele Danmark SpecielServices. The subset can be programmed to be three different kinds of telephones. Telephone for SpecielService Four memory keys are pre-programmed: Call Forwarding ON / OFF Call Waiting ON / OFF Call Barring ON / OFF... -
Page 17: Message Waiting (Only For Delta Trio)
5.1.1 Message waiting (only for DELTA TRIO) See also chapter 5 Message Waiting. If the telephone is pre-programmed for EkstraServices or DuétServices you just have to press the “Aflyt besked” key to listen to the message. It is not possible to use this function if the telephone is located behind an ISDN a/b adapter or NTab. -
Page 18: Call Forwarding (Only For Delta Trio)
5.1.3 Call forwarding (only for DELTA TRIO) To use the easy way of Call Forwarding the memory keys has to be programmed for EkstraService or DuetServices. Enable Call Forwarding when TsS services are programmed: 1. Press the Viderestilling - key. The display show *21* and the number is dialled after a pause. -
Page 19: Call Barring
5.1.4 Call barring To use the easy way of Call Barring the memory keys has to be programmed for EkstraServices or DuetServices. Enable Call Barring: 1. Press the Spærring - key. The display show *33* and the number is dialled after a pause. 2. -
Page 20: Settings Of The Subset
Settings of the subset 6.1 Quick dial Quick dial is an automatical call function. When quick dial is enabled and you press on a memory key, the subset goes offhook and the number is dialled. When quick dial is disabled, the number is showed in the display when you press on a memory key. -
Page 21: Pabx Code
6.4 PABX code Programming of PABX code (max. 3 digits): 1. Press the - key. 2. Press the 1 - key. The - symbol in the display is turned on and the actual PABX code is showed in the display. 3. -
Page 22: Technical Data
Technical data Power supply From the telephone line / batteries Types of batteries LR06 (AA) +5 °C to +55 °C Ambient temperature Humidity 5% to 90% 7.1 Cleaning The telephone can be cleaned by using a firmly wrung soft cloth rinsed in water with a few drops og detergent. -
Page 23: Troubleshooting
Troubleshooting Problem Solution The telephone does not ring. The switch no. 3 under the cover on the left side of the subset has to be placed in position ON. The telephone / microphone is very See chapter 6.2; Side tone. Try to put sensitive according to noise in teh switch no. - Page 24 DELTA S1 Last page to be replaced by 4 colour print...