Sony Cyber-shot DSC-W120 Service Manual page 20

2-4. BARRIER ASSY REPLACING METHOD
Removal
1 Turn on the power switch and extend the lens.
2 Detach the battery.
3 Pour a solvent such as alcohol from two places A to the tweezers or a needle shown below into a gap of Ornamental Ring A.
4 Remove while turning the Ornamental Ring A right and left.
5 Remove Barrier Assy by disengaging four claws.
Claws
Installation
1 Affix two Barrier Tapes to Barrier Assy.
Note: The tape must not be wrinkled.
2 With four claws fitted in position, install the Barrier Assy.
Barrier Assy
Barrier Tape
3 Peel off release papers of Barrier Tapes.
4 Install Ornamental Ring A and press it lightly.
Barrier Tapes
DSC-W120/W125_L2
Tweezers
A
Solvent
Claws
Barrier Assy
Barrier Tape
Only one hook has
different shape.
2-7
Ornamental Ring A
Claws
Claws
Barrier Assy
Ornamental Ring A