Sony DSCW1 - Cybershot 5MP Digital Camera Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Digital Camera
  5. CYBER-SHOT DSC-W1
  6. Service manual
Sony DSCW1 - Cybershot 5MP Digital Camera Service Manual

Sony DSCW1 - Cybershot 5MP Digital Camera Service Manual

Digital still camera
Hide thumbs Also See for DSCW1 - Cybershot 5MP Digital Camera:
Table of Contents

Advertisement

Quick Links

Download this manual
DSC-W1/W12
SERVICE MANUAL
Ver 1.2 2004.08
Revision History
Revision History
How to use
How to use
Acrobat Reader
Acrobat Reader
SPECIFICATIONS
SPECIFICATIONS
SERVICE NOTE
SERVICE NOTE
DISASSEMBLY
DISASSEMBLY
• For ADJUSTMENTS (SECTION 6), refer to SERVICE MANUAL, ADJ (987673651.pdf).
• For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (987673641.pdf).
• Reference No. search on printed wiring boards is available.
• Note in Lens Frame Installation
• Exchange Method of Barrier Assy
• HELP: Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
On the CH-146, SY-102, SW-422, MS-204, MS-205 flexible, JK-263 and SP-045 flexible boards
This service manual procides the information that is premised the
circuit board replacement service and not intended repair inside
the CH-146, SY-102, SW-422, MS-204, MS-205 flexible, JK-263
and SP-045 flexible boards.
Therefore, schematic diagram, printed wiring board and electrical
parts list of the CH-146, SY-102, SW-422, MS-204, MS-205
flexible, JK-263 and SP-045 flexible boards are not shown.
The following pages are not shown.
DIGITAL STILL CAMERA
BLOCK DIAGRAMS
BLOCK DIAGRAMS
FRAME SCHEMATIC DIAGRAM
FRAME SCHEMATIC DIAGRAM
SCHEMATIC DIAGRAMS
SCHEMATIC DIAGRAMS
Schematic diagram ............... Pages 4-9 to 4-28
Printed wiring board .............. Pages 4-39 to 4-48
Mounted parts location .......... Pages 4-54 and 4-55
Electrical parts list ................. Pages 5-7 to 5-8
The above-described information is shown in
service manual Level 3.
LEVEL
DSC-W1
Canadian Model
Hong Kong Model
Australian Model
Argentine Model
Brazilian Model
Tourist Model
Japanese Model
DSC-W1/W12
Chinese Model
Korea Model
PRINTED WIRING BOARDS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
REPAIR PARTS LIST
and 5-10 to 5-13
2
US Model
AEP Model
UK Model
E Model

Advertisement

Table of Contents
loading

Related Manuals for Sony DSCW1 - Cybershot 5MP Digital Camera

Summary of Contents for Sony DSCW1 - Cybershot 5MP Digital Camera

  • Page 1 DSC-W1/W12 SERVICE MANUAL LEVEL DSC-W1 Ver 1.2 2004.08 US Model Canadian Model Revision History Revision History Hong Kong Model Australian Model Argentine Model Brazilian Model How to use How to use Tourist Model Japanese Model Acrobat Reader Acrobat Reader DSC-W1/W12 AEP Model UK Model E Model...

  • Page 2: Specifications

    DSC-W1/W12 SPECIFICATIONS x Camera x BC-CS2A/CS2B Ni-MH battery [LCD screen] [System] charger LCD panel 6.2 cm (2.5 type) TFT drive Image device Power requirements Total number of dots 9.04 mm (1/1.8 type) color CCD AC 100 to 240V 50/60Hz 123 200 (560×220) dots Primary color filter Total pixels number of camera Output voltage...
  • Page 3 CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU PUBLISHED BY SONY.

  • Page 4: Table Of Contents

    DSC-W1/W12 TABLE OF CONTENTS Section Title Page SERVICE NOTE 1-1. Note for Repair ································································ 1-1 1-2. Discharging of the ST-101 Flexible Board’s Charging Capacitors (C102 and C103) ··········································· 1-1 1-3. Note in Lens Frame Installation ······································ 1-2 1-4. Description on Self-diagnosis Display ···························· 1-2 DISASSEMBLY 2-1.

  • Page 5: Service Note

    DSC-W1/W12 SECTION 1 SERVICE NOTE 1-1. NOTE FOR REPAIR Make sure that the flat cable and flexible board are not cracked of When remove a connector, don’t pull at wire of connector. bent at the terminal. It is possible that a wire is snapped. Do not insert the cable insufficiently nor crookedly.

  • Page 6: Note In Lens Frame Installation

    1-4. DESCRIPTION ON SELF-DIAGNOSIS DISPLAY Self-diagnosis display • C: ss: ss You can reverse the camera malfunction yourself. (However, contact your Sony dealer or local authorized Sony service facility when you cannot recover from the camera malfunction.) • E: ss: ss Contact your Sony dealer or local authorized Sony service facility.

  • Page 7: Disassembly

    DSC-W1/W12 SECTION 2 HELP HELP DISASSEMBLY 2-1. FLOW CHART The following flow chart shows the disassembly procedure. Note: High-voltage cautions Discharging the Capacitor Short-circuit between the two points with the short jig about 10 seconds. Capacitor ST kemikon sheet ST-101 R:1 kΩ/1 W (Part code: 1-215-869-11)

  • Page 8: Sy-102 Board Service Position

    DSC-W1/W12 2-2. SY-102 BOARD SERVICE POSITION AC power AC IN adaptor Color monitor MS-205 flexible board Control switch block Stroboscope block LCD block Lens block SY-102 board SW-422 board US-011 flexible board...

  • Page 9: Exchange Method Of Barrier Assy

    DSC-W1/W12 2-3. EXCHANGE METHOD OF BARRIER ASSY Service parts Part Number Part Name Quantity 3-091-427-01 Ring (A), Ornamental X-3954-476-1 Barrier Assy 3-086-156-31 Tapping screw (P2) Tools used Torque driver Soldering iron Weight about 60g Adhesive (Super X) (Note) Note: Use adhesive (Super X) or an equivalent article. Don’t use what becomes white after drying like a quick-drying glue.

  • Page 10: Remove Old Barrier Assy

    DSC-W1/W12 2-3-2. REMOVE OLD BARRIER ASSY 1 Remove two screws. * Discard the removed screws. 2 Remove the Barrier Assy. * Discard the removed Barrier Assy. * After removing the Barrier Assy, if the “G1 Dust-Proof Ring” was removed, it must be returned to the home position. In returning the ring, adjust the location of a projection to the lens direction.

  • Page 11: Adhere The Ornamental Ring A

    DSC-W1/W12 2-3-4. ADHERE THE ORNAMENTAL RING A Apply an adhesive to four recesses on the top surface of the Barrier Assy. * Do not apply too much adhesive. (Make quantity of adhesives into the quantity in which a groove hides.) Meeting a “notch”...

  • Page 12: Circuit Boards Location

    DSC-W1/W12 2-4. CIRCUIT BOARDS LOCATION US-011 flexible SW-422 SY-102 (including CH-146) ST-100 ST-101 flexible CH-146 (included in SY-102) MS-205 flexible JK-263 CD-507 flexible MS-204 SP-045 flexible Board Name Function CD-507 flexible CCD IMAGER CH-146 CCD SIGNAL PROCESS (included in SY-102) JK-263 JACK MS-204...
  • Page 13 DSC-W1/W12 HELP Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown. Front side Mic harness Sheet (S) US-011 flexible board HELP...

  • Page 14: Block Diagrams

    DSC-W1/W12 3. BLOCK DIAGRAMS Link Link OVERALL BLOCK DIAGRAM (1/2) POWER BLOCK DIAGRAM (1/2) OVERALL BLOCK DIAGRAM (1/2) POWER BLOCK DIAGRAM (1/2) OVERALL BLOCK DIAGRAM (2/2) POWER BLOCK DIAGRAM (2/2) OVERALL BLOCK DIAGRAM (2/2) POWER BLOCK DIAGRAM (2/2)
  • Page 15 DSC-W1/W12 SECTION 3 3. BLOCK DIAGRAMS 3. BLOCK DIAGRAMS BLOCK DIAGRAMS 3-1. OVERALL BLOCK DIAGRAM (1/2) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. SY-102 BOARD (1/2) MS-205 FLEXIBLE BOARD (1/3) CP101 LENS BLOCK CD-507 FLEXIBLE BOARD (1/2)
  • Page 16 DSC-W1/W12 3. BLOCK DIAGRAMS 3. BLOCK DIAGRAMS 3-2. OVERALL BLOCK DIAGRAM (2/2) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. SY-102 BOARD (2/2) CN703 MS-205 FLEXIBLE BOARD (2/3) SP-045 FLEXIBLE (1/3) CN001...
  • Page 17 DSC-W1/W12 3. BLOCK DIAGRAMS 3. BLOCK DIAGRAMS 3-3. POWER BLOCK DIAGRAM (1/2) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. SY-102 BOARD (1/2) CONTROL SWITCH BLOCK CN001 Q003, 011 F003 BATT UNREG CN702...
  • Page 18 DSC-W1/W12 3. BLOCK DIAGRAMS 3. BLOCK DIAGRAMS ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. 3-4. POWER BLOCK DIAGRAM (2/2) SY-102 BOARD (2/2) ST-100 BOARD ST-101 FLEXIBLE T001 CL001, CN601 BOARD...

  • Page 19: Printed Wiring Boards And Schematic Diagrams

    DSC-W1/W12 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS SECTION 4 PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS 4-1. FRAME SCHEMATIC DIAGRAM SP-045 CONTROL BT901 ST-101 FLEXIBLE BOARD ST-100 SP901 SWITCH BATTERY FLEXIBLE BOARD TERMINAL BLOCK BOARD JK-263...
  • Page 20 DSC-W1/W12 4-2. SCHEMATIC DIAGRAMS Link Link CD-507 FLEXIBLE BOARD CD-507 FLEXIBLE BOARD (CCD IMAGER) US-011 FLEXIBLE BOARD (CCD IMAGER) US-011 FLEXIBLE BOARD (USB CONNECTOR) (USB CONNECTOR) ST-100 BOARD CONTROL SWITCH BLOCK CONTROL SWITCH BLOCK ST-100 BOARD (FLASH DRIVE) (FLASH DRIVE) ST-101 FLEXIBLE BOARD ST-101 FLEXIBLE BOARD (CHARGING CAPACITOR, FLASH UNIT)
  • Page 21 DSC-W1/W12 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMS (In addition to this, the necessary note is printed in each block) (For schematic diagrams) 1. Connection • All capacitors are in µF unless otherwise noted. pF : µ Link µF.
  • Page 22 DSC-W1/W12 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS CD-507 FLEXIBLE BOARD CD-507 FLEXIBLE BOARD For Schematic Diagram • Refer to page 4-37 for printed wiring board. CD-507 FLEXIBLE BOARD Note: CD-507 flexible complete board and IC101 are not supplied, but there are included in CCD block assy. CCD IMAGER (CCD BLOCK) XX MARK:NO MOUNT Note: Voltage and Waveform of mounted on CD-507 flexible...
  • Page 23 Schematic diagrams of the CH-146, SY-102, SW-422, MS-204, MS-205 flexible, JK-263 and SP-045 flexible boards are not shown. Pages from 4-9 to 4-28 are not shown.

  • Page 24: Charging Capacitor, Flash Unit

    DSC-W1/W12 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS ST-100 BOARD ST-100 BOARD ST-101 FLEXIBLE BOARD ST-101 FLEXIBLE BOARD For Schematic Diagram • Refer to page 4-49 for printed wiring board. ST-100 BOARD NO MARK:REC/PB MODE Note: ST-100 board is included in ST-101 flexible complete board.

  • Page 25: Control Switch Block

    DSC-W1/W12 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS US-011 FLEXIBLE BOARD US-011 FLEXIBLE BOARD For Schematic Diagram • Refer to page 4-51 for printed wiring board. US-011 FLEXIBLE BOARD CONTROL SWITCH BLOCK USB CONNECTOR (US BLOCK) CONTROL SWITCH BLOCK is replaced as block, so that PRINTED WIRING BOARD is omitted.

  • Page 26: Printed Wiring Boards

    DSC-W1/W12 4-3. PRINTED WIRING BOARDS Link Link CD-507 FLEXIBLE BOARD CD-507 FLEXIBLE BOARD ST-101 FLEXIBLE BOARD ST-101 FLEXIBLE BOARD ST-100 BOARD US-011 FLEXIBLE BOARD ST-100 BOARD US-011 FLEXIBLE BOARD COMMON NOTE FOR PRINTED WIRING BOARDS COMMON NOTE FOR PRINTED WIRING BOARDS MOUNTED PARTS LOCATION CIRCUIT BOARDS LOCATION MOUNTED PARTS LOCATION...
  • Page 27 DSC-W1/W12 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS • : Uses unleaded solder. • Chip parts. Transistor Diode • : Circuit board : Flexible board Pattern from the side which enables seeing. : pattern of the rear side (The other layers’...

  • Page 28: Cd-507 Flexible

    DSC-W1/W12 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS MOUNTED PARTS LOCATION MOUNTED PARTS LOCATION CD-507 FLEXIBLE Note for Printed Wiring Board (See page 4-35). : Uses unleaded solder. CD-507 FLEXIBLE BOARD D101 D101 SELF TIMER/ AF ILLUMINATOR LND139...
  • Page 29 Printed wiring boards of the CH-146, SY-102, SW-422, MS-204, MS-205 flexible, JK-263 and SP-045 flexible boards are not shown. Pages from 4-39 to 4-48 are not shown.

  • Page 30: St-101 Flexible

    DSC-W1/W12 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS MOUNTED PARTS LOCATION MOUNTED PARTS LOCATION ST-100 ST-101 FLEXIBLE Note for Printed Wiring Board (See page 4-35). Note for Printed Wiring Board (See page 4-35). : Uses unleaded solder.
  • Page 31 DSC-W1/W12 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS US-011 FLEXIBLE Note for Printed Wiring Board (See page 4-35). : Uses unleaded solder. US-011 FLEXIBLE BOARD >PI< (ZOOM) R001 D004 CN001 (USB) LND002 LND003 LND004 LND005 LND006...

  • Page 32: Mounted Parts Location

    DSC-W1/W12 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS 4-4. MOUNTED PARTS LOCATION no mark : side A * mark : side B CD-507 FLEXIBLE BOARD C106 C107 C108 C110 D101 FB101 FB102 IC101 Q102 Q103 Q105 R102 R104 R110 R112 R113 CD-507...
  • Page 33 Mounted parts location of the CH-146, SY-102, SW-422 and MS-204 boards are not shown. Page 4-54 and 4-55 are not shown.
  • Page 34 DSC-W1/W12 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS no mark : side A * mark : side B ST-100 BOARD C001 C002 C003 C005 D004 D005 IC001 Q001 Q002 Q003 R004 R005 R006 R007 R008 R009 R010 R011 T001 ST-100 4-56E...

  • Page 35: Repair Parts List

    DSC-W1/W12 NOTE NOTE 5. REPAIR PARTS LIST NOTE: Characters A to Z of the electrical parts list indicate location of exploded views in which the desired part is shown. EXPLODED VIEWS EXPLODED VIEWS Link Link CABINET BLOCK SECTION MAIN BLOCK SECTION LENS BLOCK SECTION SIDE FRAME BLOCK SECTION CABINET BLOCK SECTION...
  • Page 36 DSC-W1/W12 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST SECTION 5 REPAIR PARTS LIST NOTE: • -XX, -X mean standardized parts, so they may have some differences from When indicating parts by reference number, the original one. please include the board name. •...
  • Page 37 DSC-W1/W12 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1. EXPLODED VIEWS 5-1-1. CABINET BLOCK SECTION ns: not supplied MIC901 Main block section (See page 5-3.) Ref. No. Part No. Description Ref. No. Part No. Description X-2021-017-1 CABINET (FRONT) ASSY (B) (W1: BLACK/W12) 3-092-127-01 COVER (L), SIDE (W1: SILVER) X-3954-542-1 CABINET (FRONT) ASSY (W1: SILVER) 3-092-127-11 COVER (L), SIDE (W1: BLACK/W12)
  • Page 38 DSC-W1/W12 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1-2. MAIN BLOCK SECTION (including ST-100 board) C102 (Note) C103 (Note) - 1 0 Side frame block section (See page 5-5.) Lens block section (See page 5-4.) The components identified by Les composants identifiés par une mark 0 or dotted line with marque 0 sont critiques pour la...
  • Page 39 DSC-W1/W12 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1-3. LENS BLOCK SECTION ns: not supplied (including CD-507 flexible board and IC101) (Note 2) - 5 0 (Note 1) (Note 1) (Note 1) (Note 1) Be sure to read “2-3. Exchange Method of Barrier Assy”...

  • Page 40: Side Frame Block Section

    DSC-W1/W12 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1-4. SIDE FRAME BLOCK SECTION - 0 1 BT001 - 4 2 LCD901 D901 BT901 (including CP101 (CH-146 board) and IC301 (KWF board)) - 1 0 - 2 0 J102 (including JK-263, MS-204 board) J101 : BT001 (BATTERY, LITHIUM SECONDARY) (Refer to page 4-51.)

  • Page 41: Electrical Parts List

    DSC-W1/W12 CD-507 5-2. ELECTRICAL PARTS LIST Ref. No. Part No. Description Ref. No. Part No. Description A-1052-103-A CCD BLOCK ASSY CD-507 FLEXIBLE BOARD, COMPLETE (Not supplied) ******************************* (CCD block assy is including CD-507 flexible board and IC101 (CCD imager).) < CAPACITOR > C106 1-125-777-11 CERAMIC CHIP 0.1uF...
  • Page 42 DSC-W1/W12 ST-100 ST-101 Ref. No. Part No. Description Ref. No. Part No. Description ST-100 BOARD, COMPLETE (Not supplied) ********************** (ST-100 board is included in ST-101 flexible complete board.) < CAPACITOR > C001 1-137-710-11 CERAMIC CHIP 10uF 6.3V C002 1-127-715-91 CERAMIC CHIP 0.22uF C003 1-125-777-11 CERAMIC CHIP...
  • Page 43 DSC-W1/W12 US-011 Ref. No. Part No. Description Ref. No. Part No. Description A-7079-042-A US-011 FLEXIBLE BOARD, COMPLETE ******************************* < BATTERY > 0 BT001 1-528-999-32 BATTERY, LITHIUM SECONDARY < CONNECTOR > CN001 1-816-112-41 CONNECTOR, SQUARE TYPE (USB) 5P (USB) < DIODE > D001 8-719-056-54 DIODE MAZS068008SO <...
  • Page 44 DSC-W1/W12 Checking supplied accessories. HR6 (size AA) Ni-MH batteries Battery case Battery charger (BC-CS2) (1) Power cord (1) 0 1-477-814-11 (US, CND, JE, J) 0 1-769-608-11 (AEP, E) (W1: 2, W12: 4) (W1: 1, W12: 2) 0 1-477-814-21 0 1-776-985-11 (KR) (not supplied) 3-074-757-01 0 1-782-476-13 (CH)
  • Page 45 DSC-W1/W12 2004H0500-1 Sony EMCS Co. 9-876-736-31 ©2004.8 — 54 — Published by DI Technical Support Section...
  • Page 46 File this supplement with the service manual. (PV04-004) • Correction and change of the supply method • Addition of Argentine Model (W1) • Addition of E and Korea Models (W12) 2004E0500-1 © 2004. 5 Sony EMCS Co. 9-876-736-82 Published by DI Technical Support Section...
  • Page 47 Correction and change of the supply method & : Points added parts. : Points changed parts. 5-1. EXPLODED VIEWS 5-1-4. SIDE FRAME BLOCK SECTION (Service manual page 5-5) FORMER - 0 1 - 0 1 BT001 BT001 - 4 2 LCD901 - 4 2 LCD901...
  • Page 48 Addition of Argentine Model (W1) Addition of E and Korea Models (W12) & : Points added parts. Checking supplied accessories. (Service manual page 5-15) HR6 (size AA) Ni-MH batteries Battery case Battery charger (BC-CS2) (1) Power cord (1) 0 1-477-814-11 (US, CND, JE, J) 0 1-769-608-11 (AEP, E) (W1: 2, W12: 4) (W1: 1, W12: 2)
  • Page 49 (PV04-011) • Addition of Chinese Model (W12) Chinese Model was added at DSC-W12. The differences with AEP, UK, E and Korea Models are only accessories. 2004H0500-1 DSC-W1/W12 © 2004. 8 Sony EMCS Co. 9-876-736-84 Published by DI Technical Support Section...
  • Page 50 [Description of main button functions on toolbar of the Adobe Acrobat Reader Ver5.0 (for Windows)] Toolbar Printing a text Reversing the screens displayed once • To reverse the previous screens (operation) one by one, click 1. Click the Print button 2.

  • Page 51: Revision History

    Reverse 987673633.pdf Revision History S.M. Rev. Ver. Date History Contents issued 2004.04 Official Release — — 2004.05 Supplement-1 Correction and change of the supply (S1 PV04-004) method Addition of Argentine Model (W1) Addition of E and Korea Models (W12) 2004.08 Supplement-2 Addition of Chinese Model (W12) (S2 PV04-011)
  • Page 52 File this supplement with the service manual. (PV04-004) • Correction and change of the supply method • Addition of Argentine Model (W1) • Addition of E and Korea Models (W12) 2004E0500-1 © 2004. 5 Sony EMCS Co. 9-876-736-82 Published by DI Technical Support Section...
  • Page 53 Correction and change of the supply method & : Points added parts. : Points changed parts. 5-1. EXPLODED VIEWS 5-1-4. SIDE FRAME BLOCK SECTION (Service manual page 5-5) FORMER - 0 1 - 0 1 BT001 BT001 - 4 2 LCD901 - 4 2 LCD901...
  • Page 54 Addition of Argentine Model (W1) Addition of E and Korea Models (W12) & : Points added parts. Checking supplied accessories. (Service manual page 5-15) HR6 (size AA) Ni-MH batteries Battery case Battery charger (BC-CS2) (1) Power cord (1) 0 1-477-814-11 (US, CND, JE, J) 0 1-769-608-11 (AEP, E) (W1: 2, W12: 4) (W1: 1, W12: 2)
  • Page 55 ST-100, ST-101 FLEXIBLE, MS-204, MS-205, FLEXIBLE, US-011 FLEXIBLE, JK-263, SP-045 FLEXIBLE 5. REPAIR PARTS LIST EXPLODED VIEWS ELECTRICAL PARTS (CH-146, SY-102, SW-422, MS-204, MS-205, FLEXIBLE, JK-263, SP-045 FLEXIBLE) 2004D0500-1 ©2004.4 Sony EMCS Co. 9-876-736-51 Published by DI Technical Support Section...
  • Page 56 DSC-W1/W12 TABLE OF CONTENTS Section Title Page Section Title Page ADJUSTMENTS Before Starting Adjustment ······················································· 6-1 1-6-2. Precautions When an Error Occurred ···························· 6-24 1-1. Adjusting Items When Replacing 1-7. Initialization of Data ······················································ 6-25 Main Parts and Boards ···················································· 6-2 Initializing All Page Data ··············································...

  • Page 57: Adjustments

    DSC-W1/W12 SECTION 6 ADJUSTMENTS Before starting adjustment EVR Data Re-writing Procedure When Replacing Board The data that is stored in the repair board, is not necessarily correct. Perform either procedure 1 or procedure 2 or procedure 3 when replacing board. Procedure 1 Save the EVR data of the machine in which a board is going to be replaced.

  • Page 58: Adjusting Items When Replacing Main Parts And Boards

    DSC-W1/W12 1-1. Adjusting items when replacing main parts and boards When replacing main parts and boards, adjust the items indicated by z in the following table. Note 1: The automatic Adjustment Program does not support the “Initialization of data”. Perform it manually. Note 2: Use the Color Shading Adjustment Program (W1P100ColorShade.exe) when performing “Color Shading Adjustment”...

  • Page 59: Camera Section Adjustments

    DSC-W1/W12 6-1. CAMERA SECTION ADJUSTMENTS 1-1. PREPARATIONS BEFORE ADJUSTMENTS 1-1-1. List of Service Tools • Oscilloscope • Color monitor • Vectorscope • AC power adapter • Calculating machine capable of calculating hexadecimal numbers. HASP key and application for adjustment (SEUS) USB cable Personal computer (Note)

  • Page 60: Preparations

    DSC-W1/W12 1-1-2. Preparations 1) Connect the equipment for adjustments according to Fig. 6-1-3. Pattern box 2) Start up the application for adjustment (SEUS). Front of the lens L = About 27 cm (PTB-450) L = About 11 cm (PTB-1450) Fig. 6-1-2 To USB connector To DC IN jack...

  • Page 61: Precautions

    DSC-W1/W12 1-1-3. Precautions 1. Setting the Switch Unless otherwise specified, set the switches as follows and per- form adjustments. 1. Mode Dial .......... P (Program auto) 2. ZOOM switch (US-011 flexible S001, S002) ... WIDE end 3. Video Out (SET UP setting) ....NTSC 4.

  • Page 62: Preparing The Flash Adjustment Box

    DSC-W1/W12 3. Preparing the Flash Adjustment Box A dark room is required to provide an accurate flash adjustment. If it is not available, prepare the flash adjustment box as given below; 1) Provide woody board A, B and C of 15 mm thickness. woody board A (2) woody board B (2) woody board C (1)

  • Page 63: Using Method Of Seus

    DSC-W1/W12 1-1-4. Using Method of SEUS 2. Operation • Page change [Page] The application for adjustment (SEUS) is used to change the coef- To change the page, click on the SEUS screen and enter ficient for calculating the signal processing or EVR data. The SEUS the page to be changed.

  • Page 64: Adjustment Programs

    DSC-W1/W12 1-2. ADJUSTMENT PROGRAMS 3. Function of Each Button on Main Menu Screen When the Automatic Adjustment Program started, the Main Menu screen in Fig. 6-1-8 will appear. On this screen, select each adjust- The DSC-W1/W12 is adjusted with the Automatic Adjustment Pro- ment section.

  • Page 65: Color Shading Adjustment Program

    DSC-W1/W12 1-2-2. Color Shading Adjustment Program 5. Screen and Function of Each Button of Color 1. Application Environment Shading Adjustment Program Windows 98/98SE/Me/2000/XP RAM: 256MB or more recommended USB: 2.0 recommended (also compatible with 1.1) Two connectors are required. 2. Installation Method Extract the file compressed in the ZIP format (W1P100Color Shade.zip).

  • Page 66: Video System Adjustments

    DSC-W1/W12 1-3. VIDEO SYSTEM ADJUSTMENTS 1-3-2. Adjustment Items of VIDEO System Adjustment The adjustment items of video system adjustment are as listed in 1-3-1. Function of Each Button on Video System Table 6-1-2. The Automatic Adjustment Program executes the ad- Adjustment Screen justment items if the VIDEO Adjustment Start button is clicked.

  • Page 67: Adjusting Method

    DSC-W1/W12 1-3-3. Adjusting Method SEUS operation screen [Automatic Adjustment Program execution items and UP/DOWN key sequence] 1. Data Setting during Video Adj. 2. Video Output Level Adj. 3. Release of Data Setting during Video Adj. [Specified value of video output level adj.] Measurement Point Video terminal of AV OUT jack (75 Ω...

  • Page 68: Camera System Adjustments

    DSC-W1/W12 1-4. CAMERA SYSTEM ADJUSTMENTS 1-4-1. Function of Each Button on Camera System Adjustment Screen [CAMERA SYSTEM ADJUSTMENT] Click the button on the Main Menu screen, and the “CAMERA SYSTEM ADJUSTMENT” screen in Fig. 6-1-15 will appear. Fig. 6-1-15 [To Menu] button The Main Menu screen comes back.

  • Page 69: Camera Adjustment 1

    DSC-W1/W12 1-4-2. Adjustment Items of Camera System Adjust- ment The adjustment items of camera system adjustment are as listed in Table 6-1-3. The Automatic Adjustment Program divides the ad- justment items into four, camera adjustment 1-4. Clicking either CAMERA Adjustment Start button allows the adjustment item which corresponds to that button to be executed.
  • Page 70 DSC-W1/W12 1-4-3. Adjusting Method Preparation of Flange Back Adj. 1. CAMERA Adjustment 1 1) The minipattern box is installed as shown in the following fig- [Automatic Adjustment Program execution items and ure. Note 1: The attachment lenses are not used. sequence] Note 2: Take care not to hit the mini-pattern box when ex- 1.
  • Page 71 DSC-W1/W12 2. CAMERA Adjustment 2 6) Upon successful completion of all items of the CAMERA [Automatic Adjustment Program execution items and Adjustment 2, the following message is displayed. Click the [OK] sequence] button. 1. Data Setting during Camera Adj. 2. Flange Back Check 3.

  • Page 72: Picture Frame Setting (Standard Picture Frame)

    DSC-W1/W12 3. Picture Frame Setting (Standard Picture Frame) In the “Color Shading Adjustment” and “CAMERA Adjustment 3”, set the picture frame so as to attain the positions shown in the following figure when shooting the color bar chart. Check on the oscilloscope Measurement Point: Video terminal of A/V OUT jack (75Ω...

  • Page 73: Color Shading Adjustment

    DSC-W1/W12 [Color Shading Adjustment] 4. Color Shading Adjustment Click the button. [Adjustment method] 1) Start Color Shading Adjustment Program (W1P100ColorShade.exe). 2) Select “DSC-W1” with the Model Select radio button. Fig. 6-1-27 A picture captured by the camera is displayed on the screen, and the adjustment and checking are performed.

  • Page 74: Camera Adjustment 3

    DSC-W1/W12 5. CAMERA Adjustment 3 5) Upon successful completion of the “AWB 3200K Check”, the [Automatic Adjustment Program execution items and following message is displayed. Set the filter in accordance sequence] with the message. 1. Data Setting during Camera Adj. 2.
  • Page 75 DSC-W1/W12 [OK] Check on the vectorscope 10) Click the button, and “11. Color Reproduction Adj.” will be executed. The following messages are displayed in order, and then operate the vectorscope to make a check with the color reproduction frame in accordance with the message. Burst Position Fig.

  • Page 76: Camera Adjustment 4

    DSC-W1/W12 6. CAMERA Adjustment 4 6) Upon successful completion of “2. Strobe Adj.”, “3. Auto Fo- Note: “CAMERA Adjustment 4” is available only once after the cus Illumination Check” is executed. power is turned on. If the adjustment is retried, turn off the 7) Upon successful completion of the “3.

  • Page 77: Lcd System Adjustments

    DSC-W1/W12 1-5. LCD SYSTEM ADJUSTMENTS 1-5-2. Adjustment Items of LCD System Adjustment The adjustment items of LCD system adjustment are as listed in Table 6-1-4. The Automatic Adjustment Program executes the ad- 1-5-1. Function of Each Button on LCD System justment items if the LCD Adjustment Start button is clicked.

  • Page 78: Adjusting Method

    DSC-W1/W12 1-5-3. Adjusting Method SEUS operation screen [Automatic Adjustment Program execution items and UP/DOWN key sequence] 1. Data Setting during LCD Adj. 2. LCD Initial Data Input 3. VCO Adj. 4. Contrast Adj. 5. V-COM Adj. 6. White Balance Adj. 7.

  • Page 79: Error

    DSC-W1/W12 1-6. ERROR 3. Adjustment Time Out In case of an error during the execution of adjustment, the Auto- matic Adjustment Program interrupts the processing at that point, and displays an error message, and then terminates the program execution there. This part indicates the adjustment item in which...

  • Page 80: Data Save Error

    DSC-W1/W12 5. Data Save Error 1-6-2. Precautions When an Error Occurred The Automatic Adjustment Program sets the data for adjustment before the adjustment starts. Accordingly, if the adjustment termi- nates by an error, the data during the adjustment may be left in the camera.

  • Page 81: Initialization Of Data

    DSC-W1/W12 1-7. INITIALIZATION OF DATA 2. Initializing Single Page Data By performing the following procedure, data of the page that you want to initialize will be initialized. 1. Initializing All Page Data Note 1: If the 6D or 6E or 6F page data have been initialized, the By performing the following procedure, data of all pages will be following adjustment needs to be performed again.

  • Page 82: Service Mode

    DSC-W1/W12 2. Bit Value Discrimination 6-2. SERVICE MODE In the following items, the bit values must be discriminated from the data displayed on the SEUS. Whether bit values are “1” or “0” 1. Setting the Test Mode can be discriminated from the table shown below. Page 2F Address 23 Data displayed on SEUS...

  • Page 83: Led Check

    DSC-W1/W12 3. LED Check Page 20 Address 04 Page 80 Address 12 Page 8E Address FE Using method: 1) Select page: 00, address: 01, and set data: 01. 2) Select page: 20, address: 04, and set data: 02. 3) Select page: 8E, address: FE, and set data: 20. 4) Select page: 80, address: 12, and set data: 01.

  • Page 84: Switch Check (2)

    DSC-W1/W12 5. Switch Check (2) Page 20 Addresses 90 to 92 Using method: 1) Select page: 20, addresses: 90 to 92. 2) By discriminating the read data, the pressed key can be dis- criminated. Data Address 00 to 0C 0D to 28 29 to 4A 4B to 77 IMAGE SIZE/...
  • Page 85 DSC-W1/W12 FOR CAMERA COLOR REPRODUCTION ADJUSTMENT Take a copy of CAMERA COLOR For NTSC mode REPRODUCTION FRAME with a clear sheet for use. DSC-W1/W12 6-29E 6-29...

This manual is also suitable for:

Cyber-shot dsc-w12

Table of Contents