Lighting Lp Gas Appliances - Fleetwood PaceArrow Vision Manual

3. Turn off, then reset the alarm.
4. Lightly fan the area around the detector to insure complete
dispersion of the gas from the lighter, and to
prevent
anoth-
er sounding of the alarm.
5. If the alarm does not sound during a test or if the green
indicator light is not visible. See your dealer or an autho-
rized Fleetwood
Service
Center. There are no batteries or
user serviceable parts inside the unit.
You will find detailed operating information for the LP gas
appliances in your Owner's Information Package. Please
read and follow these instructions.
Air trapped in the gas lines may delay the first lighting of
any appliance. It could take several seconds or minutes for
the gas to reach the appliance. To purge some of the air from
the gas system, first light a burner on the range. The other
appliances will then light more quickly.
We recommend lighting the pilot light at the range, if
equipped, rather than individually lighting each burner. This
will help prevent accidental leaks at the burner. Be sure to
turn the pilot light OFF while traveling.
The first time the furnace or oven is operated, paints and oils
used in its manufacture may generate some smoke and
fumes. If this occurs, open doors and windows to air out the
motor home. These materials should burn off after the first
15 to 20 minutes of appliance operation.
Always follow the appliance manufacturer's lighting and
operating instructions.
PACE
ARROW VisiON
LP
CAS SYSTEM
.1'1
NOTE
Remember
to
turn off the
detector it you are not
using your motor home.
The detector draws
enough current to dis-
charge your battery
LIGHTING
LP
CAS
ApPLIANCES
07,,9