Table of Contents
Advertisement
XBDM-1015LV, XBDM-1020LV, XBDM-1030LV, XBDM-1020HV USER'S MANUAL
2. Install the XBDM in a suitable horizontal location in the rack rail using four (4) user-provided
mounting screws.
Vertical Installation (0U)
1. Attach the two (2) XBDM horizontal mounting brackets (included) on each end of the XBDM
using four (4) retaining screws (included) see Figure 2.
2. Attach the two vertical mounting brackets (included) to the horizontal rack mounting brackets
on each end of the XBDM using four (4) retaining screws (included) see Figure 2.
3. Install the XBDM in a suitable vertical location on the side of the rack rail with four (4) user
provided mounting screws.
Xtreme Power Conversion® (XPC) Corporation (Rev 2/7/13)
Figure 14 – XBDM Vertical Mounting
BYPASS DISTRIBUTION MODULE
Page 11
Advertisement
Table of Contents
