Selection Of Installation Place - Toshiba MCY-MAP0401HT Installation Manual

2

SELECTION OF INSTALLATION PLACE

The installation of the air conditioning unit must be positioned in a location that can sufficiently
support its weight and give protection against adverse environmental conditions.
Failure to do so may result in unit damage and possible human injury.
Ensure that the unit is to placed where there is no risk of flammable gases.
If flammable gases accumulate around the outside of the unit combustion may occur.
Ensure the outdoor unit is fixed to the base, to prevent movement of the unit.
Obtain permission from the customer to install the unit in a location that satisfies the following
requirements :
• A location that permits level installation of the unit.
• A location that provides enough space to service the unit safely
• A location where water draining from the unit will not pose a problem
Apply electric insulation between metal section of the building and metal section of the air
conditioner in conformance with the Local Regulation.
Avoid installing in the following places.
• Place exposed to air with high salt content (seaside area), or place exposed to large quantities of sulfide gas
(hot spring). (Should the unit be used in these places, special protective measures are needed.)
• Place exposed to oil, vapor, oil smoke or corrosive gas.
• Place where organic solvent is used nearby.
• Place close to a machine generating high frequency.
• Place where the discharged air blows directly into the window of the neighboring house. (For outdoor unit)
• Place where noise of the outdoor unit is easily transmitted.
(When installing the air conditioner on the boundary with the neighbor, pay due attention to the level of noise.)
• Place with poor ventilation.
(Especially in Concealed duct type indoor unit, before air ducting work, check whether value of air volume,
static pressure and duct resistance are correct.)
Equipments
Equivalent HP
Outdoor unit capacity type
Cooling capacity (kW)
Heating capacity (kW)
WARNING
CAUTION
Inverter unit
0401 type 0501 type
4 HP 5 HP
12.1 14.0
12.5 16.0
4
0601 type
6 HP
15.5
18.0
Appearance