Installation Of Outdoor Unit - Toshiba MCY-MAP0401HT Installation Manual

5

INSTALLATION OF OUTDOOR UNIT

When using the outdoor unit under the following conditions, it is necessary to set up DIP switch on the outdoor unit
interface P.C. board.
When anyone of the following condition is applied, set up DIP switch.
1. When using PMV Kit in the Mini-SMMS system
2. When using the indoor unit under high humidity condition
[Reference]
Indoor side: 27°C dry bulb temperature
Setup method
• Turn on DIP switch [SW08] on the interface P.C. board of the outdoor unit.
24°C wet bulb temperature
Operation time 4 hours or more.
ON
1
ON
1
CAUTION
Outdoor unit interface P.C. board
SW11 SW12
ON ON
2 3 4 1 2 3 4
SW06 SW07 SW08
ON ON
2 3 4 1 2 3 4
Switch [SW08]
26
SW13 SW14
ON
1 2 3 4 1 2 3 4
SW09 SW10
ON ON
1 1 2 3 4 1 2 3 4