Table of Contents
Advertisement
ACE PLUS CORP.
Front Panel
1. Connect a DVI display here.
2. Connect a DVI display or two displays by a DVI Y-cable.
*While cascading, use the short line of the DVI Y-cable to connect to the next EX-G048A DVI input and the
long line to connect to a display.
Rear Panel
3.
5V DC
4.
Connect a device equipped with DVI output (such as a PC) to EX-G048A here.
5.
Rotary switch- Assign an ID (0-7) for the device while cascading. For example, you
can set rotary switch at 1 for the first EX-G048A and 2 for the second EX-G048A.
Please ignore the rotary switch when only single EX-G048A exists.
6.
Green LED- lights when the EX-G048A is selected.
7.
Red LED- lights when power on.
8.
Infrared Receiver
Page 5 of 11
Headquarters :
9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,
Taipei, Taiwan 231
TEL: +886-2-2912-4201
FAX: +886-2-2912-3164
Website:
www.ace-plus.com
Advertisement
Table of Contents
