User Manual
3 CONFIGURATION EXAMPLES
No configuration of the Cellular Router is required. The unit simply needs a power source, connection
to a host device, an antenna connection, network coverage and a valid SIM card inserted to enable it
to send messages. The following section has some example system configurations which you may find
useful information when setting up your own system.
NOTE: Connection to the Master Controller is at 9600 baud, 8 data bits, 1 stop bit, no parity.
3.1
Connecting to TITAN Master Controller
Connecting the Cellular Router to a Master Controller requires a blue RJ45‐RJ45 cable (supplied
in kit). For details on how to configure the Master Controller, consult the Master Controller User
Manual.
© JTECH Communications, Inc.
Cellular Router
Page 11