Table of Contents
Advertisement
Safety
•
The FreshPoint™ must be wired according to local electrical codes to prevent the possibility of
electrical shock.
•
Do not modify the power supply cord.
•
The FreshPoint™ must be installed in compliance with local plumbing codes and any other applicable codes.
•
The FreshPoint™ has been designed and tested to offer reliable service when installed by a qualified
professional and operated and maintained according to the instructions in this service manual.
•
For safety reasons, the FreshPoint™ is furnished with a low voltage power transformer to plug into the
electrical outlet. Do not replace this transformer with another power supply (except as supplied by the
manufacturer), as this may cause damage to the electronics.
•
Install the FreshPoint™ only for its intended use as described in this service manual.
•
Do not use corrosive chemicals in the FreshPoint™.
•
Do not install the FreshPoint™ if it has a damaged cord or plug, if it is not working properly, or if it has been
damaged or dropped.
•
Do not immerse the cord or plug in water.
•
Keep the cord away from heated surfaces.
•
Disconnect the FreshPoint™ from the power source before performing any service or maintenance on the
controller, meter, or solenoid valves.
•
Do not plug in the controller transformer if there is water on the electrical wiring or the power supply.
•
Always shut off the water flow and release water pressure before cleaning or maintaining the FreshPoint™.
•
The FreshPoint™ is intended for indoor use only. The power supply and controller must not be exposed to
weather elements.
•
The outlet used for power to the FreshPoint™ should be an unswitched outlet.
NOTE: This product should be installed by a qualified professional. Comply with all plumbing and
electrical codes when installing this product.
Safety, Cautions, & Warnings
Page 5
Advertisement
Table of Contents
