Switch Between Two Calls; Call Transfer; Blind Transfer; Attended Transfer - PalmMicro AR168F User Manual

C o m m u n i c a t i o n s , I n c .
current call, press FLASH key to place the current call on hold and answer the
new incoming call.

6.2.4. Switch between two calls

Press FLASH key to switch between two calls. You can also press the hook to
end current call and retrieve the on-hold call.

6.3. Call Transfer

6.3.1. Blind Transfer

During a call, press TRANSFER key to place the current call on hold and obtain
the dial tone. Enter the number to which you want to transfer the call. Press
CALL key to complete a blind transfer (without consultation).
Blind transfer will fail if the other party is busy and there is no way to resume
the original call.
If the number of you want to transfer was saved at the 001-004 entries of the
Phone Book. You can press Speed dial key M1-M4 to replace the number of
you want to transfer the call.
If Digitmap check box of AR168F phone was selected, you can dispense with
the press CALL key to complete a blind transfer.
6.3.2.

Attended Transfer

During a call, press FLASH key to place the current call on hold and obtain the
dial tone. Enter the number to which you want to transfer the call and press
Room 0611, Bldg.B Tsinghua Tongfang Technology Plaza, 1 Wangzhuang Road, Beijing, CHINA
- 32 -