Function Keys; Led Functions - PalmMicro AR168F User Manual

C o m m u n i c a t i o n s , I n c .

4.2. Function Keys

Keys
Speed-Dial key, each corresponds to
M1-M4 a speed dial number which will be
In MENU mode, press this key to back
CANCEL
UP(▲)
DOWN(▼)
Place a call to the pre-configured
MESSAGE
Press this key to accept a waiting
FLASH call, start a consulting call or switch
between two calls.
Press this key to complete a blind
TRANSFER
transfer or attended transfer.
Enter speakerphone mode. Press
SPEAKER again to switch back to the handset

4.3. LED Functions

On: The connection is all right.
Flashing: Data transmitting and
NETWORK1/2
receiving.
LED
Off: Network cable is
disconnected or network error.
Room 0611, Bldg.B Tsinghua Tongfang Technology Plaza, 1 Wangzhuang Road, Beijing, CHINA
Function
called by a single press.
to the upper menu.
Increase the output volume of handset or speakerphone.
In MENU mode, press this key to scroll up.
Decrease the output volume of handset or speakerphone.
In MENU mode, press this key to scroll down menu options.
voice message number.
mode.
- 10 -
Keys
When phone is idle,
MENU press this key to enter
12 standard Digit, *
0-9； keys are usually used
to Input IP address
,#
*
Toggle DND on and
off when phone idle or
MUTE
mute local voice when
Temporarily hold the
HOLD current call. Press
again to unhold.
In MENU mode to
enter the submenu
OK/CALL and confirm the input.
Place a phone number
Dial the last called
REDIAL
On: the power supply
is all right.
POWER LED
Off: the power supply
is disconnected.
Function
MENU mode.
·.
that replace
in a call.
or IP address.
number.