VDigi 24E100SQB User Manual page 52

Sound
The picture is good, but there is no
sound.
Channels
You cannot select your desired
channel.
Some channels are blank.
You cannot view digital channels.
General
The TV turns off automatically (the
TV enters standby mode).
The remote does not function.
HDMI equipment cannot be
recognized.
Not all channels are tuned for cable.
Press Vol +/- or Mute key.

Check the audio cable L/R connection

When using HDMI input with Super Audio CD or

DVD-Audio, DIGITAL AUDIO OUT (COAXIAL) may not
be able to output audio signal
Switch between digital and analogue mode, and select the

desired digital/analogue channel.
The channel is for scrambled/subscription service only.

Subscribe to a pay TV service.
The channel is used only for data (no picture or sound).

Contact the broadcaster for transmission details.

Contact a local installer to find out if digital transmissions

are provided in your area.
Check if the antenna/cable is broken or bent

Upgrade to a higher gain antenna.

Check if the "Sleep off" is activated.

Replace the batteries.

Check that your equipment is compatible with control for

HDMI.
Contact the related cable broadcaster

51