Basic Operation - VDigi 24E100SQB User Manual

Basic Operation

Power On / Off
1. Connect the TV unit to power source using power cord.
2. When the power indicator is in red, the TV is in standby mode. Now press the "POWER" button on
remote control or "POWER" button on top panel to turn on the TV. The TV work normally when
the power indicator is in blue.
3. Switch the TV to standby mode, just press "POWER" button on the remote control or the "POWER"
button on top panel. Now the indicator will be in red.
4. If unused for a long time in standby mode, please disconnect the power cord from the wall outlet.
Note: The TV set can turn off automatically afer 15 minutes while there is no signal input.
Select Viewing Source
Press the "SOURCE" button to display the sources list.
buttons to select desired signal, and press ENTER or "
Please use the
Note:
Please make sure the connection for your choice is available .
Input Source
DTV
TV
Component
PC RGB
-
HDMI1
HDMI2
AV
S Video
-
Storage
EXIT ENTER
33
" button to confirm.