Technical Manual
STUDIO 570
ACOUSTIC & ELECTRICAL SPECIFICATIONS:
• Nominal impedance:
• Recommended amplifier
power*:
• Frequency response:
• Sensitivity (2.83V/m):
• Crossover frequency:
SYSTEM COMPONENTS:
• Cabinet:
• Grille:
• Low-frequency transducer:
DC resistance:
• High-frequency transducer:
DC resistance:
• Crossover network:
PACKAGING
6 ohms
150 watts
45Hz – 40kHz (–6dB)
88dB
1.5kHz
Studio 570 cabinet (not for sale)
244-050-05448-0BAE
Two 5-1/4" (130mm) PolyPlas
™
with Symmetrical Field Geometry
magnet structures, cast frames and
rubber surrounds, magnetically
shielded (553J)
10.0 ohms
1" (25mm) compression driver with
neodymium magnet and one-piece
Teonex
diaphragm, magnetically
®
shielded (0500166001Z)
3.8 ohms
013-7600-05936-E
Legend on Page 2
Release Date 2011
AURAL SWEEP TEST SPECIFICATIONS:
• System Aural Sweep test:
• LF Aural Sweep test:
• HF Aural Sweep test:
PHYSICAL SPECIFICATIONS:
• Dimensions (W x H x D):
• Weight:
cones
™
WARRANTY:
• Refer to the warranty statement packed with the product.
* The maximum recommended amplifier power rating will
ensure proper system headroom to allow for occasional
peaks. We do not recommend sustained operation at these
maximum power levels.
STUDIO 570 WIRING DIAGRAM
STUDIO 570 SCHEMATIC
Discontinued Date XXXX
6.0V input 45Hz to 20kHz
5.0V input 45Hz to 1.5kHz
1.0V input 1.5kHz to 20kHz
34-1/16" x 8-7/16" x 11-3/16"
(896mm x 214mm x 284mm)
34.4 lb (15.6kg)
12/11
Need help?
Do you have a question about the STUDIO 570 and is the answer not in the manual?
Questions and answers