Setting Up Recording - Brickhouse Security USB Power Adapter Camera User Manual

Setting Up Recording

To begin recording, first plug the Power Adapter into a power
outlet. Press and hold the Power button until the red LED
comes on. Press the Power button once to enable recording.
The red LED will flash twice and then disappear, indicating
that recording has begun. To stop recording, press the Power
button once again. The red LED will appear and stay steady,
indicating that the recording has stopped and the device has
returned back to standby mode. Please allow 5 seconds to
pass before unplugging the Power Adapter to insure that the
recorded video has been saved.
Page 6 BrickHouse Security User's Guide